KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第1002页
197 [Treatm ent] Pleas e re-teac h the m ark s to the m achine. Please re-load the produc tion program . Please re-s tart the application. Please re-boot your mac hine. E630124 “Visi on System: A n error of w riting the …
196
E630116 “Vision System: It is unprescribed NAK code. NAK16 code”
[Cause] Unprescribed response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630117 “Vision System: It is unprescribed NAK code. NAK17 code”
[Cause] Unprescribed response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630118 “Vision System: It is unprescribed NAK code. NAK18 code”
[Cause] Unprescribed response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630119 “Vision System: It is unprescribed NAK code. NAK19 code”
[Cause] Unprescribed response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630120 “Vision System: There is no cabinet file”
[Cause] There is a mistake in the Sequence control in the User defined template.
[Treatment] Please re-teach the marks to the machine.
Please re-load the production program.
Please re-start the application.
Please re-boot your machine.
E630121 “Vision System: The cabinet file already exists”
[Cause] There is a mistake in the Sequence control in the User defined template.
[Treatment] Please re-teach the marks to the machine.
Please re-load the production program.
Please re-start the application.
Please re-boot your machine.
E630122 “Vision System: Failed to open the cabinet file”
[Cause] There is a mistake in the Sequence control in the User defined template.
[Treatment] Please re-teach the marks to the machine.
Please re-load the production program.
Please re-start the application.
Please re-boot your machine.
E630123 “Vision System: An error of reading the cabinet file”
[Cause] There is a mistake in the Sequence control in the User defined template.
197
[Treatment] Please re-teach the marks to the machine.
Please re-load the production program.
Please re-start the application.
Please re-boot your machine.
E630124 “Vision System: An error of writing the cabinet file”
[Cause] There is a mistake in the Sequence control in the User defined template.
[Treatment] Please re-teach the marks to the machine.
Please re-load the production program.
Please re-start the application.
Please re-boot your machine.
E630125 “Vision System: A data error of the cabinet file”
[Cause] There is a mistake in the Sequence control in the User defined template.
[Treatment] Please re-teach the marks to the machine.
Please re-load the production program.
Please re-start the application.
Please re-boot your machine.
E630200 “Vision System: A bass error occurred. Hardware abnormality”
[Cause] IMGCPU is broken.
The program could not be written in the IMGCPU properly.
[Treatment] Please change IMGCPUs.
Please re-write the program in the IMGCPU.
Please re-boot your machine.
E630201 “Vision System: An address error occurred. Hardware abnormality”
[Cause] IMGCPU is broken.
The program could not be written in the IMGCPU properly.
[Treatment] Please change IMGCPUs.
Please re-write the program in the IMGCPU.
Please re-boot your machine.
E630202 “Vision System: A spurious interruption error occurred. Hardware
abnormality”
[Cause] IMGCPU is broken.
The program could not be written in the IMGCPU properly.
[Treatment] Please change IMGCPUs.
Please re-write the program in the IMGCPU.
Please re-boot your machine.
E630203 “Vision System: It is unprescribed ERR code. ERR3 code”
[Cause] Unprescribed error response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630204 “Vision System: It is unprescribed ERR code. ERR4 code”
[Cause] Unprescribed error response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
198
Please contact our technical service dept. for information.
E630205 “Vision System: It is unprescribed ERR code. ERR5 code”
[Cause] Unprescribed error response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630206 “Vision System: It is unprescribed ERR code. ERR6 code”
[Cause] Unprescribed error response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630207 “Vision System: It is unprescribed ERR code. ERR7 code”
[Cause] Unprescribed error response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information
E630208 “Vision System: It is unprescribed ERR code. ERR8 code”
[Cause] Unprescribed error response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630209 “Vision System: It is unprescribed ERR code. ERR9 code”
[Cause] Unprescribed error response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.