KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第1005页
200 [Treatm ent] Please re-ins tall or version up the applic ation. Please re-boot your mac hine. Please contact our technical s ervice dept. f or inf orm ation. E630217 “Visi on System: It is unprescri bed ERR code. ERR…
199
E630210 “Vision System: Video Synch. Time out error occurred. Hardware
abnormality”
[Cause] IMGCPU is broken.
The program could not be written in the IMGCPU properly.
The camera cable is broken.
[Treatment] Please change IMGCPUs.
Please re-write the program in the IMGCPU.
Please change camera cables.
Please re-boot your machine.
E630211 “Vision System: A time-out error of the serial communication
occurred”
[Cause] COM port does not return any response.
Another application is using COM port.
[Treatment] Please re-start the application.
E630212 “Vision System: An error in capturing an image occurred. Hardware
abnormality”
[Cause] IMGCPU is broken.
The camera cable is not connected to the board or to camera properly.
The camera cable is broken.
The voltage is getting low in the IMGCPU.
The camera is broken.
[Treatment] Please change IMGCPUs. Please examine the camera cable.
Please change the camera cables.
Please re-adjust the power supply module(VME+5V).
Please change the cameras and adjust the new one.
Please re-boot your machine.
E630213 “Vision System: An error occurred in the internal driver”
[Cause] IMGCPU is broken.
The program could not be written in the IMGCPU properly.
[Treatment] Please change IMGCPUs.
Please re-write the program in the IMGCPU.
Please re-boot your machine.
E630214 “Vision System: The running command got a time-out”
[Cause] IMGCPU is broken.
The program could not be written in the IMGCPU properly.
[Treatment] Please change IMGCPUs.
Please re-write the program in the IMGCPU.
Please re-boot your machine.
E630215 “Vision System: It is unprescribed ERR code. ERR15 code”
[Cause] Unprescribed error response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630216 “Vision System: It is unprescribed ERR code. ERR16 code”
[Cause] Unprescribed error response was sent back from VCS.
Some program versions are clashing with each other.
200
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630217 “Vision System: It is unprescribed ERR code. ERR17 code”
[Cause] Unprescribed error response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630218 “Vision System: It is unprescribed ERR code. ERR18 code”
[Cause] Unprescribed error response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630219 “Vision System: It is unprescribed ERR code. ERR19 code”
[Cause] Unprescribed error response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630300 “ViLib Thread: Other illogical matter occurred”
[Cause] An unexpected error occurred in the vision device driver.
[Treatment] Please re-boot your machine.
E630301 “ViLib Thread: Turnaround time-out occurred”
[Cause] There is no response from VCS.
[Treatment] Please re-boot your machine.
E631010 “ViRecog Error: No mark can be found. Please examine the PWB”
[Cause] The actual mark coordinates are different from that in the data.
There is no mark on the board.
The ref. pin is not in the ref. hole properly.
A wrong board was loaded.
The light is not ON.
[Treatment] Please re-teach the marks to the machine.
Please re-load a PWB.
Please re-load the production program.
Please examine if the light gets ON properly.
201
E631011 “ViRecog Error: The mark is touching the frame. Please examine
Mark data”
[Cause] The actual mark coordinates are different from that in the data.
The ref. pin is not in the ref. hole properly.
A wrong board was loaded.
[Treatment] Please re-teach the marks to the machine.
Please re-load a PWB.
Please re-load the production program.
Please examine if the light gets ON properly.
E631012 “ViRecog Error: The consistency of the marks is too low. Please
examine the PWB”
[Cause] The actual mark coordinates are different from that in the data.
There is no mark on the board.
The marks are critically dirty.
The ref. pin is not in the ref. hole properly.
A wrong board was loaded.
The light is not ON.
[Treatment] Please examine the board.
Please re-load a PWB.
Please examine the marks.
Please re-teach the marks to the machine.
Please re-load the production program.
Please examine if the light gets ON properly.
E631013 “ViRecog Error: Other mark recognition error occurred. Please
examine the mark data”
[Cause] The actual mark coordinates are different from that in the data.
There is no mark on the board.
The marks are critically dirty.
The ref. pin is not in the ref. hole properly.
A wrong board was loaded.
The light is not ON.
An unprescribed error was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please examine the board.
Please re-load a PWB.
Please examine the marks.
Please re-teach the marks to the machine.
Please re-load the production program.
Please examine if the light gets ON properly.
Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E631020 “ViRecog Error:
The lead is bent. Please examine the component”
[Cause] The lead is bent.
The lead-bent detecting level is too low.
The light is either too bright or too dark.
The light is dirty.
The camera lens is dirty.
The camera cable almost gets cut off.
The light cable almost gets cut off.
The brilliancy of LED is varying.
[Treatment] Please raise the lead-bent detecting level in the production program.
Please examine the light parameter in the production program.