KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第101页
3 − 28 3.6.8.3 St arting the save operation W hen y ou click t he <Action> butt on, the system st arts saving the cont rol data on a floppy disk. 3.6.8.4 Fi nishing the save operation W hen the system finishes savi…
3 − 27
3.6.8 Saving a control data file
This command saves the basic control data, which is used to control the machine,
onto a floppy disk. The data to be saved here is very important to:
operate the EPU (External Program Editing Unit) according to the specifications of the
main unit, and
find out the conditions unique to the machine when a trouble occurs.
To save a control data file, use the Wizard as shown below. Follow the
instructions displayed on the screen.
3.6.8.1 Selecting a task
Normally, you can select the task “File backup” only.
To save the control data, click the <Next> button.
When you click the <Cancel> button, the system cancels the control data save
operation.
3.6.8.2 Selecting where to save the control data
Select the radio button “Floppy disk”.
)
Please select work.
Back Next Cancel
Please select the place of the backup.
Back Next Cancel
3 − 28
3.6.8.3 Starting the save operation
When you click the <Action> button, the system starts saving the control data on a
floppy disk.
3.6.8.4 Finishing the save operation
When the system finishes saving a control file, the following dialog box appears on
the screen. Click the <Finish> button, then eject the floppy disk and store it at a safe
place.
The backup is executed. Please push the action button when you can.
Back Finish Cancel
The backup is executed. Please push the action button when you can.
Back Finish Cancel
3 − 29
3.6.9 Saving the machine information
This function allows you to compress and save the machine information that is saved
as a file by your operation on the “Production” screen or the Emergency Stop
message onto a floppy disk.
Note: Use this function only if our service person or distributor requests you to do so.
Handle the obtained file as instructed also.
3.6.9.1 Start of the save operation
When you click the <Action> button on the dialog box shown below, the machine
information is saved onto a floppy disk.
Figure 3.6.9.1 Saving the machine information
3.6.9.2 End of the save operation
When the system finishes saving the information, the dialog box displays the
following information.
Figure 3.6.9.2 Dialog box indicating that the system has
finished saving the information