KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第1092页

9 Error M essages on t he M achine Set up Op erations Error code Message E301000 Memory allocation error E301001 There is no input character E301002 Input character has irregularities E301003 Input value exceeds predeter…

Error Messages on Mark Database

Error code Message

E292000 No registered data

E292001 Please select the mark

E292002 Registration number was exceeded

E292003 The mark of the same registration name exists

E292004 Please input the registration name

E292005 Please select the registered area

Q292501 The selected mark data is deleted. Is it good?

Error Messages on the Machine Setup Operations

Error code Message

E301000 Memory allocation error

E301001 There is no input character

E301002 Input character has irregularities

E301003 Input value exceeds predetermined data range. (Data range:%s)

E301012 An error occurred while measuring nozzle height by Laser

E301015 Specify user’s individual nozzle No.

E301016 An error occurred while taking nozzles off

E301017 Selected device can not move to this position. Please reselect other device on HOD

E301018 Selected device is not installed. Please reselect other device on HOD

E301019 Return to home has not yet been completed

E301020 MTC power off

E301021 MTC offline

E301023 There is no installed head

E301024 Selected device is disable. Please reselect other device on HOD

E301025 MTC is disable

E301026 Servo is in the free state

W301027 Teached data is invaled

E301028 Length of the nozzle is too short. Please check the nozzle

E301032 MTC is in the supply state

E301035 MTS is disable

E301036 MTS power off

E301037 MTS offline

E301038 MTS cannot move because of cover opening

E301039 The door of MTS opens

E301040 There is no specified stacker with the tray steps number

E301042 Because MTS is selected, the IC conveyor belt is not assembled to a rear side

E301044 Nozzle length is too long. Please check out the nozzle

E301046 Only nozzle No. has been input. Please specify nozzle types

E301047 An error occurred while taking nozzles off. The process is discontinued

E301048 Vacuum Calibration unit position can not be measured

E301049 An error occurred while installing nozzles. [Error occurs] %d [Error No.] %d [Error info] %d

E301050 In 2030, Vacuum Calibration can be set for only R1 through R4

E301051 Vacuum Calibration can be et only for small-diameter nozzles. (Settable range : 1 - %d)

E301052 Any heads have not been specified

E301053 The Changer table can not be installed on the rear side since MTC/MTS have been selected

E301054 MTC/MTS can not be connected to 2000 series machines at the same time

E301055 An error on axes occurred

E301056 An error on XY axes occurred

E301057 An error on Z axis occurred

E301058 Specified 508 nozzle has not been assigned yet. Please execute nozzle assignment

E301059 It was impossible to learn the height. Please checck out the vacuum value

E301060 DTS/MTS can not be connected to 2000 series machines at the same time

E301061 Feeder float detector can not be set only out position

Q302000 Reset I/O?

Q302001 Exit machine setup. Set value is saved?

Q302002 Error has occurred during automatic measurement of nozzle. Do you interrupt automatic

measurement?

Q302003 Return to home has not yet been completed. Return to home?

Q302004 Error has occurred during nozzle installation. Move to parking position?

Q302005 Extend shuttle?

Q302006 Do you interrupt automatic measurement?

Q302007 A nozzle is fixed to %s. Do you want to auto-return the nozzle?

Q302008 Extend MTS mark?

Q302009 Vacuum Calibration has been set already. (ATC No:%s) Would you like to disable the

setting?

Q302010 An error occurred during Auto. measuring nozzles. Would you like to discontinue the Auto.

measuring on the left station?

Q302011 An error occurred while installing nozzles. Would you like to move to the parking position?

[Error occurs] ? [Error No.] ? ?[ Error Info.] ???

Q302012 Move Z axis to where nozzles are taken off. Is that OK?

Q302013 Return Z axis to Laser height position. Is that OK?

Q302014 Please check if the backup plate is lifted up enough. It may be a little hard to see pins

when the plate is not lifted up. | Would you like to continue?

Q302015 There may be some units with ON state. Would you like to initialize these units?

I303000 Return to home of %s

I303001 Nozzle is removed from %s to ATC

I304000 Set online for MTC

I304001 Remove the nozzle from %s

I304002 A nozzle of %s is removed and return to %s of ATC

I304003 Set online for MTS

I304004 Please close the door of MTS