KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第1095页

12 Error M essages on Id le M ode Op erations Error code Message E397001 Memory allocation error E397002 Shared memory open error E397011 Return to home has not yet been completed E397012 Servo is in the free state

Error Messages on Manual Control Operations

Error code Message

E316001 Memory allocation error

E316002 Shared memory open error

E316011 There is no input character

E316012 Input character has irregularities

E316013 Input value exceeds predetermined data range

E316021 Return to home has not yet been completed

E316022 Servo is in the free state

E316031 Selected device is not install. Please reselect other device on HOD

W316041 There is no ATC that is allocated with nozzle. Allocate nozzle to ATC when setting up the

machine

W316042 Nozzle is not set on head

E316051 Z axis limit has been exceeded

E316101 Error has occurred when setting laser parameters code:%ld

E316102 Error has occurred during laser measurement(ONCE) code:%ld

E316103 Error has occurred during laser measurement(SWEEP) code:%ld

E316104 Error has occurred during the nozzle presence check | code:%ld

E316105 Error has occurred during the image data obtain. code:%ld

E316106 Error has occurred during the edge check data learning. code:%ld

E316107 Data has not been learned

E316301 MTC power off

E316302 MTC offline

E316303 MTC is in the supply state

E316401 MTS power off

E316402 MTS offline

E316403 MTS cannot move because of cover opening

E316404 The door of MTS opens

E316405 There is no specified stacker with the tray steps number

E316501 Error has occurred on axis code:%ld

E316502 The initialization error of transportation occurred. Return to home is interrupted. Error

code:%ld

E316503 The PWB was detected in the transportation road

Q317001 Exit manual control. Reset I/O?

Q317011 Return to home has not yet been completed. Return to home?

Q317021 Cannot return component. Trash component?

Q317031 Do you interrupt process?

Q317041 Is the tray of MTS stored?

I318001 Remove the component from %s

I318011 Set online for MTC

I318021 Set online for MTS

I318022 Please close the door of MTS

I318023 Remove the PWB on Conveyor

Error Messages on Idle Mode Operations

Error code Message

E397001 Memory allocation error

E397002 Shared memory open error

E397011 Return to home has not yet been completed

E397012 Servo is in the free state

Error Messages on Warming Up Operations

Error code Message

E398001 Memory allocation error

E398002 Shared memory open error

E398011 There is no input character

E398012 Input character has irregularities

E398013 Input value exceeds predetermined data range. (Data range:%d - %d)

W398021 Return to home has not yet been completed

W398022 Servo is in the free state

W398031 There is WB on conveyor. Remove the PWB

W398041 MTC power off

W398042 MTC offline

E398101 Error has occurred on driver. %s code:%d

Q398601 Do you interrupt process?

I398701 Warm-up is finished. %s:%d