KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第1097页

14 Error M essages on Set ting o f the Saf e Direction of Each I/O Dev ice Error code Message E399101 Memory allocation error E399102 Shared memory open error W 399111 Return to home has not yet been completed W 399112 S…

Error Messages on Warming Up Operations

Error code Message

E398001 Memory allocation error

E398002 Shared memory open error

E398011 There is no input character

E398012 Input character has irregularities

E398013 Input value exceeds predetermined data range. (Data range:%d - %d)

W398021 Return to home has not yet been completed

W398022 Servo is in the free state

W398031 There is WB on conveyor. Remove the PWB

W398041 MTC power off

W398042 MTC offline

E398101 Error has occurred on driver. %s code:%d

Q398601 Do you interrupt process?

I398701 Warm-up is finished. %s:%d

Error Messages on Setting of the Safe Direction of Each I/O Device

Error code Message

E399101 Memory allocation error

E399102 Shared memory open error

W399111 Return to home has not yet been completed

W399112 Servo is in the free state

Q399201 Do you continue reset I/O?

Q399211 cannot return component of %s. Trash component?

I399301 Remove the component from %s

I399311 Set online for MTC

I399312 Set online for MTS

Error Messages on a Production Program/Production

Error code Message

E500001 Window create error(%s

E500002 There is no memory enough <%s>

E500003 File reading error

E500004 The file can not be displayed <Err No : ?>

E500100 Incorrect character has been input

E500101 Input range has been exceeded. The resumption position of a placement point is set outside

of the possible range

E500102

“Input range has been exceeded. (Input range: %ld - %ld)”

E500200 PWB data has not been completed

E500201 Placement data has not been completed

E500202 Component data has not been completed

E500203 Pick-up data has not been completed

E500204 Mark data has not been completed

E500205 Vision data has not been completed

E500206 Teaching of acknowledgment of BOC mark has not been completed

E500207 Teaching of acknowledgment of IC mark has not been completed

E500208 The production program breaks

E500210 Auto. Select exists in the Pick data. Production can not be executed

E500211 There is no data which placement is specified

E500212 There is no pick point on both left and right sides in Fully Synchronized mode

E500213 The program can not be produced in the <%s> Production mode

E500214 Reference error from the Pick data to the Component data

E500215 In the accumulative mode, the number of PWBs to be produced is the same as that of

produced PWBs. Production can not be executed

E500220 Device enable of setup does not match pick data

E500300 Origin retrieval has not yet been completed

E500301 Servo is turned OFF

E500302 Air was down

E500303 Detected %s feeder float

E500401 Input order Simple Opt. Error <%s>

E500500 Teaching can not be executed

E500501 The selected device can not be used

E500502 With the selected device, it is impossible to move to the aimed position

E500503 Standard Pin position illegal. Correct coordinates can not acquire

E500605 An error occurred when disposing a component

E500700 An error occurred while Auto. PWB Width Alignment Control. The process gets discontinued

E500701 Para error. PWB Width Alignment Control occurred

E500800 A PWB is detected within the conveyors of both stations. Please remove the PWB

E500801 A PWB is detected within the conveyor of the Left station. Please remove the PWB

E500802 A PWB is detected within the conveyor of the Right station. Please remove the PWB

E501999 Abnormal stop <%s>

E500900 The connection with HLC is on-line. The production is not available with the currently selected

production program created by the machine

E500901 It is not connected to HLC. The production is not available with the currently selected

production program created by HLC

E500902 Online switch is not effective to the Setup data though the connection with HLC is turning on

E501000 MTC Move Failed

E501010 MTC Power is Off. Please Power On

E501011 MTC Emergency Switch is Pressed. Please Release the Switch