KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第1108页

25 E605213 Axes Driver: Right support table error.Serv o power is OFF. E605313 Axes Driver: AW C error.Servo pow er is OFF. E605513 Axes Driver: Left center motor error.Serv o power is OFF. E605613 Axes Driver: Right cen…

E604221 Axes Driver: LT2axis failed LA encoder setting.

E604321 Axes Driver: LT3axis failed LA encoder setting.

E604421 Axes Driver: LT4axis failed LA encoder setting.

E604521 Axes Driver: RT1axis failed LA encoder setting.

E604621 Axes Driver: RT2axis failed LA encoder setting.

E604721 Axes Driver: RT3axis failed LA encoder setting.

E604821 Axes Driver: RT4axis failed LA encoder setting.

E604130 Axes Driver: XMP error occurred on T1axis.

E604230 Axes Driver: XMP error occurred on T2axis.

E604330 Axes Driver: XMP error occurred on T3axis.

E604430 Axes Driver: XMP error occurred on T4axis.

E604530 Axes Driver: XMP error occurred on T5axis.

E604630 Axes Driver: XMP error occurred on T6axis.

E604730 Axes Driver: XMP error occurred on T7axis.

E604830 Axes Driver: XMP error occurred on T8axis.

E604131 Axes Driver: T1axis status error.

E604231 Axes Driver: T2axis status error.

E604331 Axes Driver: T3axis status error.

E604431 Axes Driver: T4axis status error.

E604531 Axes Driver: T5axis status error.

E604631 Axes Driver: T6axis status error.

E604731 Axes Driver: T7axis status error.

E604831 Axes Driver: T8axis status error.

E604132 Axes Driver: T1axis failed motion start.

E604232 Axes Driver: T2axis failed motion start.

E604332 Axes Driver: T3axis failed motion start.

E604432 Axes Driver: T4axis failed motion start.

E604532 Axes Driver: T5axis failed motion start.

E604632 Axes Driver: T6axis failed motion start.

E604732 Axes Driver: T7axis failed motion start.

E604832 Axes Driver: T8axis failed motion start.

E604133 Axes Driver: T1axis failed motion stop.

E604233 Axes Driver: T2axis failed motion stop.

E604333 Axes Driver: T3axis failed motion stop.

E604433 Axes Driver: T4axis failed motion stop.

E604533 Axes Driver: T5axis failed motion stop.

E604633 Axes Driver: T6axis failed motion stop.

E604733 Axes Driver: T7axis failed motion stop.

E604833 Axes Driver: T8axis failed motion stop.

E605110 Axes Driver: Left support table parameter error.

E605210 Axes Driver: Right support table parameter error.

E605310 Axes Driver: AWC parameter error.

E605510 Axes Driver: Left center motor parameter error.

E605610 Axes Driver: Right center motor parameter error.

E605111 Axes Driver: Left station is not used.

E605211 Axes Driver: Right station is not used.

E605112 Axes Driver: Left support table failed originating.

E605212 Axes Driver: Right support table failed originating.

E605312 Axes Driver: AWC failed originating."

E605113 Axes Driver: Left support table error.Servo power is OFF.

E605213 Axes Driver: Right support table error.Servo power is OFF.

E605313 Axes Driver: AWC error.Servo power is OFF.

E605513 Axes Driver: Left center motor error.Servo power is OFF.

E605613 Axes Driver: Right center motor error.Servo power is OFF.

E605119 Axes Driver: Left support table error.Stopper is locked.

E605219 Axes Driver: Right support table error.Stopper is locked.

E605130 Axes Driver: XMP error occurred on left support table.

E605230 Axes Driver: XMP error occurred on right support table.

E605330 Axes Driver: XMP error occurred on AWC.

E605530 Axes Driver: XMP error occurred on left center motor.

E605630 Axes Driver: XMP error occurred on right center motor.

E605131 Axes Driver: Left support table status error.

E605231 Axes Driver: Right support table status error.

E605331 Axes Driver: AWC status error.

E605531 Axes Driver: Left center motor status error.

E605631 Axes Driver: Right center motor status error.

E605132 Axes Driver: Left support table failed motion start.

E605232 Axes Driver: Right support table failed motion start.

E605332 Axes Driver: AWC failed motion start.

E605532 Axes Driver: Left center motor failed motion start.

E605632 Axes Driver: Right center motor failed motion start.

605133 Axes Driver: Left support table failed motion stop.

E605233 Axes Driver: Right support table failed motion stop.

E605333 Axes Driver: AWC failed motion stop.

E605533 Axes Driver: Left center motor failed motion stop.

E605633 Axes Driver: Right center motor failed motion stop.

E606001 Axes Driver: Measurement rotation is reversed.

Error Messages on Nozzle Replacement

Error code Message

E610001 An error occurred when the ATC slide plate was opened.

E610002 An error occurred when the ATC slide plate was closed.

E610003 A time-out error occurred when the ATC (L) slide plate was opened.

E610004 A time-out error occurred when the ATC (R) slide plate was opened.

E610005 A time-out error occurred when the ATC (L) slide plate was closed.

E610006 A time-out error occurred when the ATC (R) slide plate was closed.

E610007 The ATC (L) slide plate sensor malfunctions.

E610008 The ATC (R) slide plate sensor malfunctions.

E610009 The head parameter is not correct.

E610010 The specified cylinder does not exist.

E610011 An error occurred when the XY axes started moving.

E610012 An error occurred when the X axis started moving.

E610013 An error occurred when the XR axis started moving.

E610014 An error occurred when the Y axis started moving.

E610015 An error occurred when the Z axis started moving.

E610016 An error occurred when the theta axis started rotating.

E610017 An error occurred while the XY axis were moving.

E610018 An error occurred while the X axis was moving.

E610019 An error occurred while the XR axes were moving.

E610020 An error occurred while the Y axis was moving.

E610021 An error occurred while the Z axis was moving.

E610022 An error occurred while the theta axis was rotating.

E610023 No nozzle is assigned to the cylinder.

E610024 Production was executed with the nozzle being set.

E610025 Production was executed without any nozzle set.

E610026 The obtained nozzle width does not match with the width of the nozzle actually assigned.

E610027 An error occurred when the laser window size was set.

E610028 An error occurred when the machine checked to see if there was a laser nozzle.

E610029 An error occurred when the machine obtained the laser height of the laser nozzle.

E610030 No nozzle was detected.

E610031 The cylinder parameter is not correct.

E610032 The head is not set to "Used".

E610033 The ATC X coordinate error occurred.

E610034 The ATC Y coordinate error occurred.

E610035 The ATC Y coordinate range error occurred.

E610036 No nozzle is inserted into the cylinder. (Setup)

E610037 The nozzle is too long (0.5 mm or longer). Check the nozzle attachment condition.

E610038 The nozzle is too long (0.3 mm or longer). Check the nozzle attachment condition.

E610039 The nozzle is too long (1.0 mm or longer). (Setup)

E610040 The nozzle is too short (10.0 mm or longer) (Setup)

E610041 The width of the nozzle is not that of the standard nozzle. (Setup)

E610042 When the machine checked to see if there was a nozzle after the nozzle was returned, it

detected a shadow.

E610043 The coordinates to which the head moves is within the head interference area (SLOW).

E610044 The coordinates to which the head moves is within the head interference area (STOP).

E610045 The ATC (L) slide plate cannot be closed.

E610046 The ATC (R) slide plate cannot be closed.

E610047 The cylinder to which the nozzle is to be returned is illegal.