KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第1179页
96 [Treatm ent] Pleas e turn of f the power supply of the m achine and reboot it. E510011 “Fail ed in the mail reception” [Cause] T he sof tware did not get started pr operly. [Treatm ent] Pleas e turn of f the power sup…
95
cannot be performed”
[Cause] This message appears when a measurement functionality gets called by pressing
F5 key while pausing and the components are not running out.
[Treatment] Please press OK button.
E510001 “The error occurred by the XY axis”
[Cause] Something was wrong with XY axes movement.
[Treatment] Please perform the Home returning.
E510002 “The error occurred by the Z axis”
[Cause] Something was wrong with XY axes movement.
[Treatment] Please perform the Home returning.
E510003 “The error occurred by the Theta axis”
[Cause] Something was wrong with the Theta axis movement.
[Treatment] Please perform the Home returning.
E510004 “The error occurred by the axis”
[Cause] Something was wrong with axis movement.
[Treatment] Please perform the Home returning.
E510005 “The command error occurred”
[Cause] An un-recognizable command was issued.
[Treatment] A wrong version has been installed.
Please install the latest software.
E510006 “Failed in the opening of the master schedule”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510007 “Failed in create of the mail of the scheduler”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510008 “Failed in the opening of the mail of the application-manager”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510009 “Failed in the mail transmission to the application-manager”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510010 “Failed in the mail check”
[Cause] The software did not get started properly.
96
[Treatment] Please turn off the power supply of the machine and reboot it.
E510011 “Failed in the mail reception”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510012 “Failed in the opening of the mail of the production-control”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510013 “Failed in the transmission of the mail to the production-control”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510014 “Failed in the opening of the command of the trans-driver”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510015 “Failed in the transmission of the command to the trans-driver”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510016 “Failed in the reception of the response from the trans-driver”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510017 “Failed in the opening of the command of the sub-scheduler”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510018 “Failed in the transmission of the command to the sub-scheduler”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510019 “Failed in the reception of the response from the sub-scheduler”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510020 “Failed in the opening of the command of the XY-robot”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510021 “Failed in the transmission of the command to the XY-robot”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
97
E510022 “Failed in the reception of the response from the XY-robot”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
W510401 “The IC collection belt is brimmer”
[Cause] Although the IC collection belt is selected in the ’Component reject to’ in the
Component data, the component cannot be returned since the IC collection belt is
full.
[Treatment] Please hit the OK button.
Also, if you want to use the IC collection belt, please remove the component.
I510801 “It is temporary stop by the part protection. Please detach parts”
[Cause] ’Protect’ is selected in the ‘Component reject to’ in the Component data.
[Treatment] Please remove the component manually and hit the OK button.
E511001 “It is packet making error”
[Cause] Failed to create a Production movement packet.
[Treatment] Please contact our technical service dept. for information.
E511002 “The command error occurred”
[Cause] An un-recognizable command was issued.
[Treatment] A wrong version has been installed.
Please install the latest software.
E511003 “Failed in create of the command of a sub-scheduler”"
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E511004 “Failed in the opening of the command of the application-manager”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E511005 “Failed in the transmission of the response to the
application-manager”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.