KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第1180页
97 E510022 “Fail ed in the recepti on of the response fr om the XY-robot ” [Cause] T he sof tware did not get started pr operly. [Treatm ent] Pleas e turn of f the power supply of the m achine and reboot it. W510401 “The…
96
[Treatment] Please turn off the power supply of the machine and reboot it.
E510011 “Failed in the mail reception”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510012 “Failed in the opening of the mail of the production-control”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510013 “Failed in the transmission of the mail to the production-control”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510014 “Failed in the opening of the command of the trans-driver”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510015 “Failed in the transmission of the command to the trans-driver”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510016 “Failed in the reception of the response from the trans-driver”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510017 “Failed in the opening of the command of the sub-scheduler”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510018 “Failed in the transmission of the command to the sub-scheduler”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510019 “Failed in the reception of the response from the sub-scheduler”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510020 “Failed in the opening of the command of the XY-robot”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E510021 “Failed in the transmission of the command to the XY-robot”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
97
E510022 “Failed in the reception of the response from the XY-robot”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
W510401 “The IC collection belt is brimmer”
[Cause] Although the IC collection belt is selected in the ’Component reject to’ in the
Component data, the component cannot be returned since the IC collection belt is
full.
[Treatment] Please hit the OK button.
Also, if you want to use the IC collection belt, please remove the component.
I510801 “It is temporary stop by the part protection. Please detach parts”
[Cause] ’Protect’ is selected in the ‘Component reject to’ in the Component data.
[Treatment] Please remove the component manually and hit the OK button.
E511001 “It is packet making error”
[Cause] Failed to create a Production movement packet.
[Treatment] Please contact our technical service dept. for information.
E511002 “The command error occurred”
[Cause] An un-recognizable command was issued.
[Treatment] A wrong version has been installed.
Please install the latest software.
E511003 “Failed in create of the command of a sub-scheduler”"
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E511004 “Failed in the opening of the command of the application-manager”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E511005 “Failed in the transmission of the response to the
application-manager”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
98
E511006 “Failed in the reception of the command from the
application-manager”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E511007 “Failed in the opening of the command of the scheduler”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E511008 “Failed in the transmission of the response to the scheduler”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E511009 “Failed in the reception of the command from the scheduler”
[Cause] The software did not get started properly.
[Treatment] Please turn off the power supply of the machine and reboot it.
E512801 “L1 HEAD: Recognized angle is wrong.”
[Cause] Component measurement and recognition with the L1 head output incorrect
angles during production.
[Treatment] (1) Check if the outline dimensions and pick angle are correctly specified in
component data and pick data.
(2) Exit every application and shut down the operating system. Then turn off
machine power and turn it on again.
If the error persists after the restart, there is the possibility of measurement unit
failure, recognition unit failure and/or improper operation sequence. Stop using
the machine, take a note of the error number, and contact our service engineer or
the agency.
E512802 “L1 HEAD: Cannot use the specified feeder for the pick position.”
[Cause] The pick X coordinate of the L1 head in production is considerably different from
the specified coordinate in pick data.
[Treatment] Exit every application and shut down the operating system. Then turn off machine
power and turn it on again.
If the error persists after the restart, there is the possibility of CPU failure,
memory failure and/or improper operation sequence. Stop using the machine,
take a note of the error number, and contact our service engineer or the agency.
E512803 L1 HEAD: An encoder counter overflow was detected while the
theta-axis was moving.
[Cause] The encoder counter for the L1 theta-axis overflows during production.
[Treatment] Exit every application and shut down the operating system. Then turn off machine
power and turn it on again.
If the error persists after the restart, there is the possibility of CPU failure,
memory failure and/or improper operation sequence. Stop using the machine,
take a note of the error number, and contact our service engineer or the agency.