KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第120页
4 − 13 T ext Out, Pri nt and Cancel butt ons Print: starts printing t he selected data. Cancel: closes t he dialog box displayed on the screen. T ext Out: Outputs da ta as tex t. W hen y ou click t he <T ext Out > …
4 − 12
4.2.6.1 Program Data
When you select the menu item [Program Data], the dialog box appears as shown
below.
Mode
As the default value, “Each station” is selected.
Output data
Check the box located next to the data to be printed.
Data whose total number of records is “0” (displayed with the [Data completion
status] command) is dimmed to indicate that it cannot be selected.
Depending on the print format selected with the “Mode” item, boxes of data types
which can be selected are automatically checked.
4 − 13
Text Out, Print and Cancel buttons
Print: starts printing the selected data.
Cancel: closes the dialog box displayed on the screen.
Text Out: Outputs data as text.
When you click the <Text Out> button, the dialog box appears on the
screen as shown in the figure below.
Specify where to save the text and the name on this dialog box.
The default setting in the "Save in" box is the directory/folder under which
the production program file is stored.
Placement data
Select the input order of Placement data.
Component data
Select the Component data window type: Details or List.
Pick data
Select Pick data mode:
− Input order
− Position order
− Feeder setup sheet Excluding comment
− Feeder setup sheet Including comment
4 − 14
Station selection (Data which can be printed depending on the model name)
Data types which can be printed vary depending on the model of a machine.
For a 2010 or 2030
− PWB data
− Placement data
− Component data
− Pick data
For a 2020 or 2040
− PWB data
− Placement data
− Component data
− Pick data
− VIsion data
If the following dialog box appears on the screen after printing the selected data, it
indicates that the program data has been modified after you executed the
Optimization utility the last time. Note that the currently displayed data may be
different from the optimized data.
<OK> button: Continues printing data although its contents are different from
those of the optimized file.
<Cancel> button: Terminates printing, then returns to the dialog box previously
displayed on the screen.
When you execute the Optimization utility again, the displayed program data
becomes the same as the newly optimized data, so the dialog box shown above
will not appear on the screen.
After you select a menu or select the <OK> button on the dialog box above, the
following dialog box appears on the screen.