KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第1277页

194 correct. Some pr ogram vers ions are clas hing with each other. [Treatm ent] Please re-ins tall or version up the applic ation. Please re-boot your mac hine. E630103 “Visi on System: Component ID number is invalid” […

100%1 / 1361
193
E630052 “ViLib Entry:Error Execute Undefined Command”
[Cause] You tried to execute an undefined vision command.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
E630053 “ViLib Thread: Undefined ViOS event is requested”
[Cause] You tried to execute an undefined vision command.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
E630073 “Vision Data: Ball patter has not been set yet”
[Cause] There is no ball patter data in the vision data.
[Treatment] Please examine the production program.
Please re-load the production program.
E630074 “Camera scale has not been set yet”
[Cause] There are some items that have not been set yet in the Camera scaling in MS
Parameter.
[Treatment] Please examine the Camera scaling in MS Parameter.
E630075 “The window frame does not fit in the screen”
[Cause] The component outer shape window frame does not fit in the screen if it is rotated
to the tracing posture.
[Treatment] The component is too large to trace.
E630081 “There is not valid mark within the detecting window”
[Cause] The light is not ON.
There is no mark.
[Treatment] Please examine if the light gets on properly.
Please change the coordinates to where a mark exists or move the mark
detecting frame.
E630100 “Vision System: The parameter value is illegal”
[Cause] You tried to send an illegal data to VCS.
[Treatment] Please examine the parameter.
E630101 “Vision System: parameter count is wrong”
[Cause] The format of the command interface between the VCS and your machine is not
correct.
Some program versions are clashing with each other
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
E630102 “Vision System: You tried to register an undefined component or
mark”
[Cause] The format of the command interface between the VCS and your machine is not
194
correct.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
E630103 “Vision System: Component ID number is invalid”
[Cause] An invalid component ID number is sent.
[Treatment] Please examine the vision data in the production program.
Please re-load the production program.
E630104 “Vision System: Undefined command was issued”
[Cause] The format of the command interface between the VCS and your machine is not
correct.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
E630105 “Vision System: Recognition conditions are not enough”
[Cause] The vision data in the production program is broken.
The format of the command interface between the VCS and your machine is not
correct.
Some program versions are clashing with each other.
[Treatment] Please examine the vision data in the production program.
Please re-load the production program.
Please re-install or version up the application.
Please re-boot your machine.
E630106 “Vision System: There is not enough storage of the user defined
template”
[Cause] VCS does not have enough memory(Restorable error)
VCS does not have enough flash memory(Non-restorable error)
An error occurred in the hardware of VCS(Non-restorable error)
[Treatment] Please re-boot your machine.
Please change IMGCPUs.
E630107 “Vision System: You are ran out of the resources for the general
vision component data”
[Cause] Some settings of the general vision data in the production program data are
wrong.
A production program with old(new) format was read in.
VCS does not have enough memory(Restorable error)
Some program versions are clashing with each other.
[Treatment] Please examine the vision data in the production program.
Please see the completion status of the production program.
Please re-load the production program.
Please re-start the application.
Please re-install or version up the application.
Please re-boot your machine.
E630108 “Vision System: The component is not supported as General Vision
component”
[Cause] The vision data in the production program data is broken.
Some settings of the general vision data in the production program data are
wrong.
A production program with old(new) format was read in.
195
Some program versions are clashing with each other.
[Treatment] Please examine the vision data in the production program.
Please see the completion status of the production program.
Please re-load the production program.
Please re-start the application.
Please re-install or version up the application.
Please re-boot your machine.
E630109 “Vision System: It is unprescribed NAK code. NAK9 code”
[Cause] Unprescribed response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630110 “Vision System: A physical error of FLASH occurred”
[Cause] Flash memory of VCS is broken.
Flash memory of VCS has not been formatted yet.
[Treatment] Please change IMGCPUs.
E630111 “Vision System: There is not enough space in FLASH”
[Cause] Flash memory of VCS is broken.
Flash memory of VCS has not been formatted yet.
Flash memory of VCS is not enough.
[Treatment] Please change IMGCPUs.
E630112 “Vision System: System error of FLASH occurred”
[Cause] Flash memory of VCS is broken.
Flash memory of VCS has not been formatted yet.
[Treatment] Please change IMGCPUs.
E630113 “Vision System: Current cabinet is UNTITLED”
[Cause] There is a mistake in the Sequence control in the User defined template.
[Treatment] Please re-load the production program.
Please re-start the application.
Please re-boot your machine.
E630114 “Vision System: There are several templates with the same ID”
[Cause] There is a mistake in the Sequence control in the User defined template.
[Treatment] Please re-teach the marks to the machine.
Please re-load the production program.
Please re-start the application.
Please re-boot your machine.
E630115 “Vision System: It is unprescribed NAK code. NAK15 code”
[Cause] Unprescribed response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.