KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第1278页

195 Some pr ogram vers ions are clas hing with each other. [Treatm ent] Please exam ine the vision data in the pr oduction program . Please see the com pletion s tatus of the production progr am . Please re-load the prod…

100%1 / 1361
194
correct.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
E630103 “Vision System: Component ID number is invalid”
[Cause] An invalid component ID number is sent.
[Treatment] Please examine the vision data in the production program.
Please re-load the production program.
E630104 “Vision System: Undefined command was issued”
[Cause] The format of the command interface between the VCS and your machine is not
correct.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
E630105 “Vision System: Recognition conditions are not enough”
[Cause] The vision data in the production program is broken.
The format of the command interface between the VCS and your machine is not
correct.
Some program versions are clashing with each other.
[Treatment] Please examine the vision data in the production program.
Please re-load the production program.
Please re-install or version up the application.
Please re-boot your machine.
E630106 “Vision System: There is not enough storage of the user defined
template”
[Cause] VCS does not have enough memory(Restorable error)
VCS does not have enough flash memory(Non-restorable error)
An error occurred in the hardware of VCS(Non-restorable error)
[Treatment] Please re-boot your machine.
Please change IMGCPUs.
E630107 “Vision System: You are ran out of the resources for the general
vision component data”
[Cause] Some settings of the general vision data in the production program data are
wrong.
A production program with old(new) format was read in.
VCS does not have enough memory(Restorable error)
Some program versions are clashing with each other.
[Treatment] Please examine the vision data in the production program.
Please see the completion status of the production program.
Please re-load the production program.
Please re-start the application.
Please re-install or version up the application.
Please re-boot your machine.
E630108 “Vision System: The component is not supported as General Vision
component”
[Cause] The vision data in the production program data is broken.
Some settings of the general vision data in the production program data are
wrong.
A production program with old(new) format was read in.
195
Some program versions are clashing with each other.
[Treatment] Please examine the vision data in the production program.
Please see the completion status of the production program.
Please re-load the production program.
Please re-start the application.
Please re-install or version up the application.
Please re-boot your machine.
E630109 “Vision System: It is unprescribed NAK code. NAK9 code”
[Cause] Unprescribed response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630110 “Vision System: A physical error of FLASH occurred”
[Cause] Flash memory of VCS is broken.
Flash memory of VCS has not been formatted yet.
[Treatment] Please change IMGCPUs.
E630111 “Vision System: There is not enough space in FLASH”
[Cause] Flash memory of VCS is broken.
Flash memory of VCS has not been formatted yet.
Flash memory of VCS is not enough.
[Treatment] Please change IMGCPUs.
E630112 “Vision System: System error of FLASH occurred”
[Cause] Flash memory of VCS is broken.
Flash memory of VCS has not been formatted yet.
[Treatment] Please change IMGCPUs.
E630113 “Vision System: Current cabinet is UNTITLED”
[Cause] There is a mistake in the Sequence control in the User defined template.
[Treatment] Please re-load the production program.
Please re-start the application.
Please re-boot your machine.
E630114 “Vision System: There are several templates with the same ID”
[Cause] There is a mistake in the Sequence control in the User defined template.
[Treatment] Please re-teach the marks to the machine.
Please re-load the production program.
Please re-start the application.
Please re-boot your machine.
E630115 “Vision System: It is unprescribed NAK code. NAK15 code”
[Cause] Unprescribed response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
196
E630116 “Vision System: It is unprescribed NAK code. NAK16 code”
[Cause] Unprescribed response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630117 “Vision System: It is unprescribed NAK code. NAK17 code”
[Cause] Unprescribed response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630118 “Vision System: It is unprescribed NAK code. NAK18 code”
[Cause] Unprescribed response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630119 “Vision System: It is unprescribed NAK code. NAK19 code”
[Cause] Unprescribed response was sent back from VCS.
Some program versions are clashing with each other.
[Treatment] Please re-install or version up the application.
Please re-boot your machine.
Please contact our technical service dept. for information.
E630120 “Vision System: There is no cabinet file”
[Cause] There is a mistake in the Sequence control in the User defined template.
[Treatment] Please re-teach the marks to the machine.
Please re-load the production program.
Please re-start the application.
Please re-boot your machine.
E630121 “Vision System: The cabinet file already exists”
[Cause] There is a mistake in the Sequence control in the User defined template.
[Treatment] Please re-teach the marks to the machine.
Please re-load the production program.
Please re-start the application.
Please re-boot your machine.
E630122 “Vision System: Failed to open the cabinet file”
[Cause] There is a mistake in the Sequence control in the User defined template.
[Treatment] Please re-teach the marks to the machine.
Please re-load the production program.
Please re-start the application.
Please re-boot your machine.
E630123 “Vision System: An error of reading the cabinet file”
[Cause] There is a mistake in the Sequence control in the User defined template.