KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第1289页

206 Q631181 “There is a simil ar pattern in the l ow er part of the templ ate. Would you like to take the teaching resul ts in?” [Cause] T he user defined tem plate has a s imilar patter in the upper part of the tem plat…

100%1 / 1361
205
E631027 “ViRecog Error: Failed to find lead(s). Please examine Pick
position”
[Cause] Picking posture is not correct.
The picked component is different from a component in the Component data.
The component is not being picked.
The light is either too bright or too dark
The light is dirty.
The camera lens is dirty.
The light cable almost gets cut off.
The brilliancy of LED is varying.
[Treatment] Please examine the Pick data in the production program.
Please examine the Component data in the production program.
Please examine the Vision data in the production program.
Please examine the Component data (Vacuum value without component) in the
production program.
Please examine the light parameter in the production program.
Please adjust the light parameter in the production program.
Please clean the light.
Please clean the camera lens.
Please change the light cables.
Please re-adjust the electric currency of the light.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new
board.
E631028 “ViRecog Error:Mis-recognized the fine pitch lead. Please examine
Light conditions”
[Cause] The light is either too bright or too dark.
The light is dirty.
The camera lens is dirty.
The light cable almost gets cut off.
The brilliancy of LED is varying.
[Treatment] Please examine the light parameter in the production program.
Please adjust the light parameter in the production program.
Please clean the light.
Please clean the camera lens.
Please change the light cables.
Please re-adjust the electric currency of the light.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new
board.
Q631180 “There is a similar pattern in the upper part of the template. Would
you like to take the teaching results in?”
[Cause] The user defined template has a similar patter in the upper part of the template.
[Treatment] Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in
although the template may not be recognized correctly.
206
Q631181 “There is a similar pattern in the lower part of the template. Would
you like to take the teaching results in?”
[Cause] The user defined template has a similar patter in the upper part of the template.
[Treatment] Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in
although the template may not be recognized correctly.
Q631182 “There is a similar pattern on the left side of the template. Would
you like to take the teaching results in?”
[Cause] The user defined template has a similar patter on the left side of the template.
[Treatment] Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in
although the template may not be recognized correctly.
Q631183 “There is a similar pattern on the right side of the template. Would
you like to take the teaching results in?”
[Cause] The user defined template has a similar patter on the left side of the template.
[Treatment] Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in
although the template may not be recognized correctly.
Q631184 “The template does not have enough contrast. Would you like to
take the teaching results in?”
[Cause] The user defined template does not have enough contrast.
[Treatment] Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in
although the template may not be recognized correctly.
Q631185 “The template has no features. Would you like to take the teaching
results in?”
[Cause] The specified user defined template does not have any notable patterns.
[Treatment] Please re-teach other user defined templates to the machine.
If you do not have other user defined templates, current template will be taken in
although the template may not be recognized correctly.
E631186 “The contrast for the entire image is too low. Please modify the
conditions and teach again”
[Cause] The specified user defined template does not have any notable patterns.
[Treatment] Please re-teach other user defined templates to the machine.
207
Q631200 “The light is getting darker. Please clean the light”
[Cause] The light is dirty.
The camera lens is dirty.
The camera cable almost gets cut off.
The light cable almost gets cut off.
The brilliancy of LED is varying.
The amount of the electric currency of the light is varying.
[Treatment] Please clean the light.
Please clean the camera lens.
Please change the camera cables.
Please change the light cables.
Please re-adjust the electric currency of the light.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new
board.
E631201 “The light is too dark. Please clean the light”
[Cause] The light is dirty.
The camera lens is dirty.
The camera cable almost gets cut off.
The light cable almost gets cut off.
The brilliancy of LED is varying.
The amount of the electric currency of the light is varying.
[Treatment] Please clean the light.
Please clean the camera lens.
Please change the camera cables.
Please change the light cables.
Please re-adjust the electric currency of the light.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new
board.
E631202 “The light is not ON. Please examine it”
[Cause] The camera cable is cut off.
The light cable is cut off.
LED is broken.
The light board is broken.
The camera is broken.
[Treatment] Please change the camera cables.
Please change the light cables.
Please change the lights and re-adjust the electric currency of the new light.
Please change the light boards and re-adjust the electric currency of the new
board.
Please change the cameras and re-enter the MS parameter.