KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第165页
4 – 58 ⑥ Mar k Select f rom the pop- up list box whether or not corr ection is made f or placement position using t he area f iducial mark when the machine places a component on a board. W hen y ou enter t he component I…
4 – 57
If += is appended before the number entered, that number is added to the
value of the field one line above the field at the cursor.
If -= is appended before the number entered, that number is subtracted from
the value of the field one line above the field at the cursor.
Note: Do not enter any space between “+” and “+”, “-“ and “-“, “+” and “=“, or “-“ and
“=“.
③ Angle
Enter the placement angle using the formula bar.
The setting range is from 0° to 359.95° in increments of 0.05°.
③ Component name
Enter the component name using the formula bar. Each time a component name
is entered, the component data space is allocated accordingly. If you enter a
wrong component name, the corresponding component data space is released
when you change the wrong name unless you enter any Component data.
When you enter a component name, the machine searches it through the
Component library. When the machine finds the same component name in the
Component library, it loads the corresponding component data into a production
program. Upper case characters and lower case characters are handled as the
same as each another, but are displayed separately. If a component name is
registered in the Component database in advance, the registered characters are
displayed instead of the characters you entered here.
The length of a component name is up to 20 characters.
The 21st and the following characters are ignored.
⑤ Pla. Head
Select the head to mount on the machine from the pop-up list box. If you do not
want to select a head, select “Auto” from the pop-up list box displayed as shown
below.
4 – 58
⑥ Mark
Select from the pop-up list box whether or not correction is made for placement
position using the area fiducial mark when the machine places a component on a
board.
When you enter the component ID, “No” (this means “not used”) appears as
default for the mark. To change the default setting, using the Edit key ( F2 key)
of clicking the input field with the right button of a mouse, open the list box to
select the desired item.
If you want to change the “Mark” items of Placement data at a time, select the
desired Placement data records in advance, and then change them.
When you select “Yes” (this means “planned to be used”), you have to enter
positions of two sets of area fiducial marks. Even though you enter the position
of only one set of fiducial marks, Placement data cannot be completed.
⑦ Mark ID
If you want to use a mark as an area fiducial mark, assign an ID to mark data so
that you can use specify the desired mark.
Use the formula bar to enter a mark ID. When the “Mark” item is set to “Yes”,
the system allows you to enter a mark ID and automatically generates it so the
same ID cannot be generated.
If you enter a mark ID manually and the same mark ID already exists, the mark
data is linked to each other and can be shared.
4 – 59
If you want to use the already assigned mark ID, select the desired mark ID from
the “Mark Data List”: this list allows you to specify the desired mark ID easily.
To open the “Mark Data List”, use the Edit key or click the input filed with the right
mouse button. The list box appears on the screen, and you can select and enter
a mark ID.
Note that only this “Mark Data List” allows you to change two or more mark data
IDs at a time. Select the desired Placement data, and change them.
This command allows you to display the “Mark Data List.”
Mark Data List
− Description of operation for changing a mark ID manually
(1) If the changed mark ID is shared
The message “Do you want to update the mark data?” appears on the
screen. When you click the <OK> button, the mark data specified for
Placement data is shared with the specified mark data. When you click the
<Cancel> button, the entered mark ID becomes invalid, and the system
displays the screen that appeared before you enter the mark ID.
(2) If the shared mark ID is changed to a new ID
The following confirmation message appears on the screen.
List Viewer