KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第167页
4 – 60 According t o the radio butt on you check, the system handles Placement data and mark data in the various ways as show n below . Example: If you change the m ark I D of t he Placement dat a record 02 to “ AAA” whe…
4 – 59
If you want to use the already assigned mark ID, select the desired mark ID from
the “Mark Data List”: this list allows you to specify the desired mark ID easily.
To open the “Mark Data List”, use the Edit key or click the input filed with the right
mouse button. The list box appears on the screen, and you can select and enter
a mark ID.
Note that only this “Mark Data List” allows you to change two or more mark data
IDs at a time. Select the desired Placement data, and change them.
This command allows you to display the “Mark Data List.”
Mark Data List
− Description of operation for changing a mark ID manually
(1) If the changed mark ID is shared
The message “Do you want to update the mark data?” appears on the
screen. When you click the <OK> button, the mark data specified for
Placement data is shared with the specified mark data. When you click the
<Cancel> button, the entered mark ID becomes invalid, and the system
displays the screen that appeared before you enter the mark ID.
(2) If the shared mark ID is changed to a new ID
The following confirmation message appears on the screen.
List Viewer
4 – 60
According to the radio button you check, the system handles Placement data and
mark data in the various ways as shown below.
Example: If you change the mark ID of the Placement data record 02 to “AAA” when
one mark data is shared with three Placement data records
Before changing the mark ID
Mark ID Mark data
Placement data 01 M001
X:
△△、
Ｙ
:
□□、
TI:
●
........ Shared mark data
Placement data 02
Placement data 03
① When you select the radio button “Rename all of the same ID” and click the
<OK> button
The shared mark ID is changed. The shared mark ID is changed to the mark ID
you specified on the Placement data screen.
Mark ID Mark data
Placement data 01 AAA
X:
△△、
Ｙ
:
□□、
TI:
●
........ Shared mark data
Placement data 02
Placement data 03
② When you select the radio button “Duplicate with the new name” and click the
<OK> button
New mark data is created. The shared mark data is copied to the mark data X,
Y and TI.
Mark ID Mark data
Placement data 01 M001
X:
△△、
Ｙ
:
□□、
TI:
●
........ Shared mark data
Placement data 02
Copied
Placement data 03
AAA
X:
△△、
Ｙ
:
□□、
TI:
●
........ Not shared mark data
③ When you select the radio button “Create new blank mark data” and click the
<OK> button
New mark data is created. Any data is not set to the mark data “X”, “Y” and “TI”
by default.
Mark ID Mark data
Placement data 01 M001
X:
△△、
Ｙ
:
□□、
TI:
●
........ Shared mark data
Placement data 02
Placement data 03
AAA
X:
、
Ｙ
:
、
TI:
........ Not shared mark data
④ When you click the <CANCEL> button
The mark ID you entered becomes invalid, and the original mark ID is set again.
4 – 61
− Saving unused mark data
If you change the setting of the menu item “Mark” from “Yes” to “No” or if you
change the mark ID to make the associated mark data shared with two or
more placement data records, the mark data you have used until you perform
such an operation may enter the unused status. However, if the mark data
position (X, Y) or recognition parameter (TI) is already entered, the mark data
will be maintained. If you want to use unused mark data, manually enter a
mark ID or select mark data from the “Mark Data List.”
You can delete unused mark data on the “Mark Data List” also. To do so,
select the mark data to be deleted, and click the <Delete> button.
Note that unused mark data will be deleted when you save the corresponding
file.
⑧ Mark position (Mark 1 X, Mark 1 Y, Mark 2 X and Mark 2 Y)
Using the formula bar, set the mark position.
The input value can be entered only when the Mark item set as “Yes”.
⑨ Mark recognition parameters (Mark-1TI, Mark-2TI)
These indicate obtained whether or not the recognition parameters of the mark is
already obtained.
Perform the teaching operation to obtain these parameters.
When teaching is complete, “OK” appears. If it is incomplete, there will be no
indication.
⑩ Skip
This item specifies whether or not to skip the displayed point of placement: Yes or
No
“No” (for “Not skipped”) is displayed as a default in the “Skip” field. To change
the setting of the “Skip” field, press the Edit key ( F2 key) or press the right
button of a mouse to open the list box and select “Yes” or “No”.
If you want to change the “Mark” items of Placement data at a time, select the
desired Placement data records in advance, and then change them.