KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第168页
4 – 61 − Saving unused mark data If you change t he setting of t he menu item “ Mark” f rom “ Y es” to “No” or if you change the m ark I D to mak e the associated mar k data shar ed with two or more placement data record…
4 – 60
According to the radio button you check, the system handles Placement data and
mark data in the various ways as shown below.
Example: If you change the mark ID of the Placement data record 02 to “AAA” when
one mark data is shared with three Placement data records
Before changing the mark ID
Mark ID Mark data
Placement data 01 M001
X:
△△、
Ｙ
:
□□、
TI:
●
........ Shared mark data
Placement data 02
Placement data 03
① When you select the radio button “Rename all of the same ID” and click the
<OK> button
The shared mark ID is changed. The shared mark ID is changed to the mark ID
you specified on the Placement data screen.
Mark ID Mark data
Placement data 01 AAA
X:
△△、
Ｙ
:
□□、
TI:
●
........ Shared mark data
Placement data 02
Placement data 03
② When you select the radio button “Duplicate with the new name” and click the
<OK> button
New mark data is created. The shared mark data is copied to the mark data X,
Y and TI.
Mark ID Mark data
Placement data 01 M001
X:
△△、
Ｙ
:
□□、
TI:
●
........ Shared mark data
Placement data 02
Copied
Placement data 03
AAA
X:
△△、
Ｙ
:
□□、
TI:
●
........ Not shared mark data
③ When you select the radio button “Create new blank mark data” and click the
<OK> button
New mark data is created. Any data is not set to the mark data “X”, “Y” and “TI”
by default.
Mark ID Mark data
Placement data 01 M001
X:
△△、
Ｙ
:
□□、
TI:
●
........ Shared mark data
Placement data 02
Placement data 03
AAA
X:
、
Ｙ
:
、
TI:
........ Not shared mark data
④ When you click the <CANCEL> button
The mark ID you entered becomes invalid, and the original mark ID is set again.
4 – 61
− Saving unused mark data
If you change the setting of the menu item “Mark” from “Yes” to “No” or if you
change the mark ID to make the associated mark data shared with two or
more placement data records, the mark data you have used until you perform
such an operation may enter the unused status. However, if the mark data
position (X, Y) or recognition parameter (TI) is already entered, the mark data
will be maintained. If you want to use unused mark data, manually enter a
mark ID or select mark data from the “Mark Data List.”
You can delete unused mark data on the “Mark Data List” also. To do so,
select the mark data to be deleted, and click the <Delete> button.
Note that unused mark data will be deleted when you save the corresponding
file.
⑧ Mark position (Mark 1 X, Mark 1 Y, Mark 2 X and Mark 2 Y)
Using the formula bar, set the mark position.
The input value can be entered only when the Mark item set as “Yes”.
⑨ Mark recognition parameters (Mark-1TI, Mark-2TI)
These indicate obtained whether or not the recognition parameters of the mark is
already obtained.
Perform the teaching operation to obtain these parameters.
When teaching is complete, “OK” appears. If it is incomplete, there will be no
indication.
⑩ Skip
This item specifies whether or not to skip the displayed point of placement: Yes or
No
“No” (for “Not skipped”) is displayed as a default in the “Skip” field. To change
the setting of the “Skip” field, press the Edit key ( F2 key) or press the right
button of a mouse to open the list box and select “Yes” or “No”.
If you want to change the “Mark” items of Placement data at a time, select the
desired Placement data records in advance, and then change them.
4 – 62
⑪ Test
This item specifies whether or not to carry out a test run. If you specify a
placement point within the range for trial run to set the conditions for a trial run,
only the Placement data whose “Test” field is set to “Yes” is used to perform a
trial run.
“No” (for “Not to carry out a test run”) is displayed as a default in the “Test list
box” field. To change the setting of the “Test” field, press the Edit key (F2 key)
or click the input focus with the right button of a mouse to call a list box and select
“Yes” or “No”.
If you want to change the “Mark” items of Placement data at a time, select the
desired Placement data records in advance, and then change them.
⑫ Lyr (Layer)
To change the setting of the “Lyr” field, press the Edit key ( F2 key) or press the
right button of a mouse to open the list box, then select the desired layer.
If you want to change the “Mark” items of Placement data at a time, select the
desired Placement data records in advance, and then change them.
The selectable layers are from the layer 1 to layer 7.