KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第191页
4 – 84 3) W hen "Tray" is selected ① Pilot position Enter the dist ance fr om the t ray outline to the cent er point of the f irst component position ( X, Y) . ② Pitch Enter the com ponent pitch ( distance betw…
4 – 83
③
Belt Feeder Type
Select the belt feeder type.
This item is available only when you select “Belt” at the menu item “Type”
above.
④
Feed waiting time
Set the ratio of the component feeding time to the waiting time for the next
component to be picked up after the current component is picked up. A
unique value is provided to each component type. Specify this unique value
in percentage here.
⑤
Supply angle
Select the desired component supply angle with using the corresponding
radio button.
When you select “Other” as the component type, enter the appropriate angle
in the edit field (0 to 359 degrees).
4 – 84
3) When "Tray" is selected
①
Pilot position
Enter the distance from the tray outline to the center point of the first
component position (X, Y).
②
Pitch
Enter the component pitch (distance between two consecutive components)
(X- and Y-pitch)
③
No. of row/column
Enter the number of components which are located in the X direction and
that in the Y direction (Xn and Yn) respectively.
Yn
Xn
Yn
Xn
MTC
TR4, TR6
Figure 4.7.3.1 First component position, pitch and number of components
Tray holder, DTS, MTS, (TR5)
Pitch X First
Pitch Y
First
component
First
component
position X
Shuttle
PWB Transport path
Pitch X
Pitch
Y
Front of the machine
First component
position X
First
component
position Y
4 – 85
④
Tray first position
Enter the distance from the tray holder edge to the tray reference position (X,
Y) on the tray holder.
⑤
Pitch between
Enter the tray pitch (distance between two consecutive trays) in the holder
(Pitch X, Pitch Y).
⑥
division
Enter the number of horizontal divisions of a tray (Xn) and that of vertical
divisions (Yn).
⑦
Tray Thick
Enter the height "T" from the bottom of a tray to the top including a
component.
Case 1 Case 2
T T
Figure 4.7.3.2 Tray thickness
⑧
Feeder
Select a feeder with the corresponding radio button.
If you change the "Component packaging" of a component, whose two or
more Pick data records are entered, to a tray, DTS or MTC/MTS, the dialog
box shown below appears on the screen.
When you specify "MTC/MTS", select the feeding condition on the combo
box. The feeding condition specified here is to be referred when you
perform the Optimization utility to divide data or when you specify the stage
of Pick data.
Supply Cond (Feeding condition)
Auto Both the MTC and MTS can be used
MTC only Only MTC can be used.
MTS only Only MTS can be used.
Component Tray
Pitch X
Pitch Y
Y
X
Xn
Yn