KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第253页

4 – 146 Check that display s the error message “The light ty pe is different” on the screen Lead component whose dimension X is from 1.9 mm to 74 mm W hen the light type is neither “Bottom Lights” nor “Side Lights” Lead …

100%1 / 1361
4 – 145
Ball component whose dimension Y is
from 0.6 mm to 46.5 mm
Component whose pitch Y is not within the range between 0.35 mm
and 6.5 mm
Lead component whose dimension X is
from 2.5 mm to 74.0 mm
Element dimension X is not within the range between 0.22 mm and
11.0 mm
Lead component whose dimension X is
from 2.3 mm to 68.0 mm
Element dimension X is not within the range between 0.15 mm and
7.7 mm
Lead component whose dimension X is
from 2.1 mm to 48.0 mm
Element dimension X is not within the range between 0.11 mm and
5.5mm
Lead component whose dimension X is
from1.9 mm to 31.0 mm
Element dimension X is not within the range between 0.08 mm and
3.7 mm
Lead component whose dimension Y is
from 2.5 mm to 150.0 mm
Element dimension Y is not within the range between 0.4 mm and
20.0 mm
Lead component whose dimension Y is
from 2.3 mm to 100.5 mm
Element dimension Y is not within the range between 0.3 mm and
14.0 mm
Lead component whose dimension Y is
from 2.1 mm to 72.0 mm
Element dimension Y is not within the range between 0.2 mm and
10.0 mm
Lead component whose dimension Y is
from 1.9 mm to 46.5 mm
Element dimension Y is not within the range between 0.14 mm and
7.0 mm
Ball component whose dimension X is
from 2.0 mm to 74.0 mm
Element dimension X is not within the range between 0.4 mm and
5.0 mm
Ball component whose dimension X is
from 1.2 mm to 68.0 mm
Element dimension X is not within the range between 0.28 mm and
3.5 mm
Ball component whose dimension X is
from 1.0 mm to 48.0 mm
Element dimension X is not within the range between 0.2 mm and
2.5 mm
Ball component whose dimension X is
from 0.6 mm to 31.0 mm
Element dimension X is not within the range between 0.14 mm and
1.5 mm
Mark component whose dimension X is
from 5.0 mm to 74.0 mm
Element dimension X is not within the range between 2.0 mm and
10.0 mm
Mark component whose dimension X is
from 3.5 mm to 68.0 mm
Element dimension X is not within the range between 1.4 mm and
7.0 mm
Mark component whose dimension X is
from 2.5 mm to 48.0 mm
Element dimension X is not within the range between 1.0 mm and
5.0 mm
Mark component whose dimension X is
from 1.7 mm to 31.0 mm
Element dimension X is not within the range between 0.7 mm and
3.0 mm
Mark component whose dimension Y is
from 5.0 mm to 150.0 mm
Element dimension Y is not within the range between 2.0 mm and
10.0 mm
Mark component whose dimension Y is
from 3.5 mm to 100.5 mm
Element dimension Y is not within the range between 1.4 mm and
7.0 mm
Mark component whose dimension Y is
from2.5 mm to 72.0 mm
Element dimension Y is not within the range between 1.0 mm and
5.0 mm
Mark component whose dimension Y is
from 1.7 mm to 46.5 mm
Element dimension Y is not within the range between 0.7 mm and
3.0 mm
Check that displays the error message “Wrong number of divisions” on the screen
Component whose dimension X is
50.0 mm or more
When “2” is not selected as the number of divisions
Component whose dimension Y is
50.0 mm or more
When “1” is selected as the number of divisions
Component whose dimension Y
is120.0 mm or more
When “3” is not selected as the number of divisions
Component whose dimension Y is
from 46.5 mm to 48 mm
When “3” is selected as the number of divisions
4 – 146
Check that displays the error message “The light type is different” on the screen
Lead component whose dimension X is
from 1.9 mm to 74 mm
When the light type is neither “Bottom Lights” nor “Side Lights”
Lead component whose dimension X is
from 9.0 mm to 35.0 mm
When the light type is not “Back Light”
Lead component whose dimension Y is
from 1.9 mm to 150.0 mm
When the light type is neither “Bottom Lights” nor “Side Lights”
Lead component whose dimension Y is
from 9.0 mm to 120.0 mm
When the light type is not “Back Lights”
Ball component whose dimension X is
from 0.6 mm to 74 mm
When the light type is neither “Bottom Lights” nor “Side Lights”
Ball components When the light type is “Back Lights”
Ball component whose dimension Y is
from 0.6 mm to 150.0 mm
When the light type is neither “Bottom Lights” nor “Side Lights”
Outline-recognition component whose
dimension X is from 1.7 mm to 74 mm
When the light type is neither “Bottom Lights” nor “Side Lights”
Outline-recognition component whose
dimension X is from 9.0 mm to 35.0 mm
When the light type is not “Back Lights”
Outline-recognition component whose
dimension Y is from 1.7 mm to 150.0
mm
When the light type is neither “Bottom Lights” nor “Side Lights”
Outline-recognition component whose
dimension Y is from 9.0 mm to 120.0
mm
When the light type is not “Back Lights”
Check that displays the error message “Different VCS type” on the screen
Dimension X of a component is from
68.0 mm to 74.0 mm and the number of
divisions X is 2.
If a VCS other than the standard VCS is selected
Dimension X of a component is from
50.0 mm to 68.0 mm and the number of
divisions X is 2.
If a VCS other than the standard VCS and optional 37.5-mm VCS
is selected
Dimension X of a component is
from48.0 mm to 50.0 mm and the
number of divisions X is 2.
If a VCS other than an optional 37.5-mm VCS is selected
Dimension X of a component is from
34.0 mm to 48.0 mm and the number of
divisions X is 2.
If a VCS other than an optional 37.5- or 27-mm VCS is selected
Dimensions of a component are from
31.0 mm to 34.0 mm and the number of
divisions X is 2.
If a VCS other than an optional 27-mm VCS is selected
Dimension X of a component is from
24.0 mm to 31.0 mm and the number of
divisions X is 2.
If a VCS other than an optional 27-mm VCS or 18-mm VCS is
selected
Dimensions of a component are from
15.5 mm to 24.0 mm and the number of
divisions X is 2.
If a VCS other than an optional 18-mm VCS is selected
Dimension X of a component is from
34.0 mm to 50.0 mm and the number of
divisions X is 1.
If a VCS other than the standard VCS is selected
4 – 147
Dimension X of a component is from
24.0 mm to 34.0 mm and the number
of divisions X is 1.
If a VCS other than the standard VCS or optional 37.5-mm VCS is
selected
Dimension X of a component is from
15.5 mm to 24.0 mm and the number
of divisions X is 1.
If a VCS other than the standard VCS or optional VCS (37.5-mm or
27-mm) is selected
Dimension X of a component is from
2.3 mm to 2.5 mm and the number of
divisions X is 1.
If the component type is a lead component and the standard VCS
is used
Dimension X of a component is from
2.1 mm to 2.3 mm and the number of
divisions X is 1.
If the component type is a lead component and the standard VCS
or optional 37.5-mm VCS is used
Dimension X of a component is from
1.9 mm to 2.1 mm and the number of
divisions X is 1.
If the component type is a lead component and a VCS other than
an optional 18.0-mm VCS is selected
Component dimension X is from1.2
mm to 2.0 mm and the number of
divisions X is 1.
If the component type is a ball component and the standard VCS is
selected
Dimension X of a component is from
1.0 mm to 1.2 mm and the number of
divisions X is 1.
If the component type is a ball component and the standard VCS or
optional 37.5-mm VCS is selected
Dimension X of a component is from
0.6 mm to 1.0 mm and the number of
divisions X is 1.
If the component type is a ball component and a VCS other than an
optional 18.0-mm VCS is selected
Dimension Y of a component is from
100.5 mm to 150 mm and the number
of divisions Y is 3.
If a VCS other than the standard VCS is selected
Dimension Y of a component is from
100 mm to 100.5 mm and the number
of divisions Y is 3.
If a VCS other than the standard VCS or optional 37.5-mm VCS is
selected
Dimension Y of a component is from
72 mm to 100 mm and the number of
divisions Y is 3.
If a VCS other than an optional 37.5-mm VCS is selected
Dimension Y of a component is from
68 mm to 72 mm and the number of
divisions Y is 3.
If a VCS other than an optional 37.5-mm or 27-mm VCS is selected
Dimension Y of a component is from
48 mm to 68 mm and the number of
divisions Y is 3.
If a VCS other than an optional 27-mm VCS is selected
Dimension Y of a component is from
31.0 mm to 46.5 mm and the number
of divisions Y is 3.
If a VCS other than an optional 18-mm VCS is selected
Dimension Y of a component is from
68 mm to 100 mm and the number of
divisions Y is 2.
If a VCS other than the standard VCS is selected
Dimension Y of a component is from
50 mm to 68 mm and the number of
divisions Y is 2.
If a VCS other than the standard VCS or optional 37.5-mm VCS is
selected
Dimension Y of a component is from
48 mm to50 mm and the number of
divisions Y is 2.
If a VCS other than an optional 37.5-mm VCS is selected
Dimension Y of a component is from
34 mm to 48 mm and the number of
divisions Y is 2.
If a VCS other than an optional 37.5-mm or 27-mm VCS is selected