KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第295页
4 – 188 1) Operat ion ① Loading/Ejecting a PW B Select whether to load or ej ect a PW B on the “Conveyor operation” list. ② BOC alignment Select whether to perf orm BOC alig nment operat ion af ter loading a PW B. W hen …
4 – 187
4.12.1 Transport
4.12.1.1 PWB load/PWB eject
These commands loads or ejects a PWB respectively.
After you select either of these commands, the Conveyor dialog box, which moves
the axis to the safety position, appears on the screen if the safety cover opens.
Check the safety of the machine and yourself, then press the <Start> button.
Figure 4.12.1.1.1 Conveyor - safety confirmation dialog box
After the axis moves to the safety position, the following “Pwb conveyor” dialog box
appears on the screen.
Figure 4.12.1.1.2 PWB conveyor dialog box
4 – 188
1) Operation
① Loading/Ejecting a PWB
Select whether to load or eject a PWB on the “Conveyor operation” list.
② BOC alignment
Select whether to perform BOC alignment operation after loading a PWB.
When you select the radio button “Follows the operation option.”, the setting
of the teaching item provided as the Operation Options is applied to the BOC
alignment operation.
2) State
The current PWB transport operation settings and status are displayed
sequentially.
To start transporting a PWB, press the <Start> button (or click the <Execution>
button). To finish transporting a PWB, click the <Exit> button. To abort operation
while a PWB is being transported for some reason, press the <Stop> button.
4 – 189
4.12.1.2 Auto conveyor
This command adjusts the width of the PWB transport rails.
When you select this command, the following dialog box appears on the screen.
Figure 4.12.1.2.1 Automatic conveyor width adjustment dialog box
1) Move of conveyor width
The <Move> button changes the width of the PWB transport rails to the width:
PWB dimension (Y) + the margin. The values of the following items are applied to
the actual width during transportation of a PWB.
2) PWB dimensions
Use the spin button or enter a number from a keyboard to set the dimensions of a
PWB. As the default setting, the PWB dimension (Y) specified in PWB data is
entered here.