KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第419页
6 − 43 6.3 Retry List Display The Retr y List display function displays inf ormation of err ors that occurred in the execution of board pr oduction to be check ed. The inf orm ation contains the f ollowing items. (1) Unp…
6 − 42
(2) Basic Operations
When you select the [Window] command on the menu bar, and select the
[Production Info.] command and the [I/O status] command on the displayed menu
in this order, the system displays the screen on the I/O status as shown in Figure
6.2.4.3.
When you click the <REFLESH> button while the system is not producing any
PWB, it displays the latest information.
Figure 6.2.4.3 “I/O status” screen
If the machine has only one available parameter, “---“ appears in the right column.
The unit not assembled onto the machine is disabled on the screen above.
6 − 43
6.3 Retry List Display
The Retry List display function displays information of errors that occurred in the
execution of board production to be checked. The information contains the following
items.
(1) Unplaced item list
No. Item displayed Contents
1 Compo. ID Unplaced component ID of the placement data
2 Ckt. Unplaced circuit pattern No.
3 Step Unplaced placement step
4 error Reason of unplacement
Descriptions of errors
(a) Approximate classification
No. Display Cause of the error
1 Mark recognition Unplaced because of failure of IC mark recognition
2 LA recognition Unplaced because of failure of component LA recognition
3 Component Unplaced because of component type errors
4 Feeder unit type Unplaced because of failure of feeder units
5 Setting Unplaced because of failure of setting such as setup
(b) Details
Details of errors are available for each error of approximate classification and
show the cause of each error, and they are displayed as follows:
① VCS recognition errors
Value Error contents Value Error contents
20 Bent lead 41 Ball outer frame recognition error (Bottom
side ball detecting error [Detection result:
less than 1/3])
21 Lead length error 42 Ball outer frame recognition error (Left side
ball detecting error [Detection result: less
than 1/3[]
22 Lead pitch error 43 Ball outer frame recognition error (Right side
ball detecting error [Detection result: less
than 1/3])
23 The number of detected leads is less than the
specified number.
44 Ball outer frame recognition error (Ball top
and bottom sides inclining error [three
degrees or more])
24 The number of detected leads is more than
the specified number.
45 Ball outer frame recognition error (Ball left
and right sides inclining error [three degrees
or more])
25 No lead is detected. 46 Ball outer frame recognition error (Distance
between the top side and the bottom side on
which balls are located is wide [half-pitch].)
26 The number of detected leads is one to three. 47 Ball outer frame recognition error (Distance
between the left side and the right side on
which balls are located is wide [half-pitch].)
27 Component frame detection error 60 All balls recognition error (Ball pitch error)
6 − 44
28 Fine-pitch lead detection error 61 All balls recognition error (Ball recognition
error [dimmed or dark])
29 The number of detected leads is less than the
specified number.
(Extended-lead connector)
62 All balls recognition error (The ball top and
bottom sides inclining error [three degrees or
more])
30 The number of detected leads is more than
the specified number.
(Extended-lead connector)
63 All balls recognition error (The ball left and
right sides inclining error [three degrees or
more])
40 Ball outer frame recognition error (Top side
ball detection error [Detection result: less
than 1/3])
64 All balls recognition error (Distance between
the top and bottom sides on which balls are
located is wide [half-pitch])
65 All balls recognition error (The distance
between the right and left sides on which ball
are located is wide [half-pitch])
107 Multi-lead recognition error (Impossible
positioning)
66 All balls recognition error (Ball inspection
area creating error)
108 Multi-lead recognition error (Lead detection is
impossible.)
67 All balls recognition error (Ball deformation
inspection error)
120 Random ball recognition error (Ball pitch
error)
68 All balls recognition error (Ball diameter
inspection error)
121 Random ball recognition error (Ball
deformation inspection error)
69 All balls recognition error (Ball brightness
error)
122 Random ball recognition error (Ball diameter
inspection error)
70 All balls recognition error (Ball existence
inspection error)
123 Random ball recognition error (Ball existence
inspection (diameter) error)
80 Outline recognition error (No component) 124 Random ball recognition error (Ball existence
inspection (intensity) error)
81 Outline recognition error (Component size
error)
125 Random ball recognition error (Ball existence
inspection (intensity) error: the number of
samples is not enough.)
82 Outline recognition error (There is no target
pattern in the inspection frame.)
140 Ball inspection error (Ball detection error)
83 Outline recognition error (IC mark inclining
error [one degree or more])
141 Ball inspection error (Matrix size error)
84 Outline recognition error (Distance between
the top and bottom marks or right and left
marks is wrong. [+ 0.5 mm or wider])
142 Ball inspection error (Number of balls error)
85 Outline recognition error (OFC component
recognition error)
143 Ball inspection error (Ball diameter error)
100 Multi-lead recognition error (Bent lead) 144 Ball inspection error (Intensity reference
obtaining error)
101 Multi-lead recognition error (Lead length
error)
145 Ball inspection error (Intensity characteristics
error)
102 Multi-lead recognition error (Lead pitch error) 160 Outline measurement error (Component is
tilted too much.)
103 Multi-lead recognition error (The number of
detected leads is less than the specified
number.)
161 Outline measurement error (Dimensions are
too large.)
104 Multi-lead recognition error (The number of
detected leads is more than the specified
number.)
162 Outline measurement error (Dimensions are
too small.)
105 Multi-lead recognition error (No detected
lead)
163 Outline measurement error (No component)
106 Multi-lead recognition error (The number of
detected leads is one to three.)
999 Other recognition error