KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第5页
II Matters of Caution Reg arding Safet y To prevent accidents due t o electric shock , tur n off power supply if it is necessary to open the electrical eq uipment box. For added precaution, open t he lid of the box only …
I
Warning
For the safe operation of machinery!!
All personnel engaged in the operation of the chip placer and its accessories (here after
referred to as "machines") including the operators, service and maintenance personnel are
required to read through this safety warning to make familiar with its handling to prevent
accidents and injuries.
This "Warning: For the safe operation of machinery" instructions contain aspects that are
not included in the instruction sheet attached to the product.
The following symbols are used throughout this instructions and on the product for the better
understanding of various warning labels. Please make yourself familiar with the contents
and act accordingly.
1) Danger levels
Dangerous
Parts of machinery the negligence or mishandling of which
committed during the operation, maintenance or other services on
such parts will lead to severe accidents involving serious personal
injuries or even death.
Warning
Parts of machinery the negligence or mishandling of which
committed, or are left unattended, during the operation,
maintenance or other services on such parts may cause potential
danger to the personnel which may lead to injuries and/or even
death.
Attention
Parts of machinery the negligence or mishandling of which
committed, or are left unattended, during the operation,
maintenance or other services on such parts may cause the
medium-to-light level of hazards to the personnel involved.
2) Warning, prohibition and directive marks
Warning, prohibition and directives are marked with the following symbols:
Warning marks
Your hands or clothes may get
caught by the machines.
Beware of moving parts.
Contacts with them may cause
injuries.
High voltage!!
Beware of electric shocks.
Beware of hot parts.
Contacts with them may cause a
burn.
Beware of movable parts.
Contacts with them may cause
injuries.
If any load is imposed or you
lay your hand on the machine,
it may be damaged.
Directive symbols
It symbolizes a contact to a
grounding wire.
It indicates the direction of turn.
II
Matters of Caution Regarding Safety
To prevent accidents due to electric shock, turn off power supply if it is necessary to
open the electrical equipment box. For added precaution, open the lid of the box only
after a lapse of more than five minutes.
Basic Matters of Precaution
1. Be sure to read all documents included in this Manual and the attached booklet
before using this machine. Also, keep this Manual carefully so as to be able to
read it whenever necessary.
2. Contents of this Manual include items that are not included in specifications of the
machine purchased.
3. The machine should be operated only by the operator who has learned how to run
it.
4. Regarding the repair or maintenance (excluding daily inspection and other matters
specified in the Manual), ask our company or its agent to do it.
5. General maintenance, inspection, and repair (matters specified in this Manual) shall
be conducted only by specialized maintenance engineers who have finished the
maintenance course specified by our company.
With regard to repair (matters specified in this Manual), use genuine parts of our
company.
Safety Equipment, Alarm Label
1. In order to prevent accidents due to nonpresence of safety equipment, start to
operate this machine only after confirming that the equipment is suitably installed at
the specified position.
2. If the safety equipment is dismantled, be sure to attach it to its original position, and
confirm that it operates normally.
3. Make sure that the warning label stuck to the machine will be always clearly visible.
If it has been peeled off or stained, order new labels from our company and
exchange old labels with new ones.
4. If the safety equipment is damaged, remove it. Never operate the machine. If
you operate the machine without the safety equipment, it may lead to severe
accidents involving serious personal injuries or even death.
Application
1. Never use this machine for purposes other than its original application.
Our company will not be responsible in the case of its use for other application.
2. Do not remodel this machine. Our company will not be responsible for any
accident arising as a result of its remodeling.
Operational Training
1. To prevent accidents due to unaccustomed handling, operation of this machine
must be limited to operators who have participated in the operation training
specified by our company and have appropriate knowledge and operating skills.
DANGER
CAUTION
III
To turn off power supply means to turn off
a power supply switch and then to draw out
a power plug from a receptacle or to
separate the power cable from the supply
side.
Hereinafter the same.
Situations in Which It Is Necessary to Turn Off Power Supply
1. In the case of an abnormality or an accident, or in the event of power failure,
immediately turn off power supply.
2. In order to prevent accidents due to unintended start-up of the machine, carry out
inspection, repair, or cleaning of the machine only after turning off power supply.
3. When drawing out the power supply plug, do it by holding the plug itself, not the
cord.
Matters of Caution at Each of Its Use Stages
Transport
1. When lifting the machine or moving it, take sufficient safety measures so that no
dropping accidents will occur.
Unpacking
1. Read all instructions shown on the transport-use container.
2. Never cut tapes with a cutter.
3. Retain delivery-use materials.
Installation
1. To prevent the occurrence of any accident due to unintended moving of the
machine in operation, make casters float using a height adjuster.
2. Install this machine at a flat position.
3. To prevent the occurrence of electric shock, power leakage, or fires, use attached
products regarding cables, and link them to the specified positions.
4. To prevent electric shock, power leakage, or fires, make sure that irrational force
will be applied to the cables while the machine is in operation.
5. Securely fix the power supply plug and the connector of an I/F cable. When
drawing out the power supply plug or the I/F cable, do it by holding the connector
unit.
Before Operation
1. To prevent accidents to human bodies, make sure before supplying power that
there is no damage, coming off of parts, or loosening of connectors and cables.
2. To prevent bodily accidents, never put in your hand into the driving unit.
CAUTION