KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第594页

8 − 5 (3) Head contr ol menu ① How to sta rt W hen y ou click t he right button of a tr ackball or t he F9 key , t he pop-up menu appears. Select t he desired item f rom the menu. The unit which is not check ed (not inst…

8 − 4

− Others

Figure 8.1.6 Others pull-down menu

During selection of a manual control command, the command summary is not

displayed on the message line.

Selection of each command opens the corresponding dialog box.

Select or set the parameters on each dialog box as necessary and execute the

command.

The unit without a check mark for “Option” setting of MS parameters (not installed)

cannot be selected.

This setting does not affect the “Device enable” setting on the Machine Setup menu.

(This means that the units without a check mark can be selected.)

Note: For an MTC or MTS, any unit which is not checked (not installed) on the

“Device enable” menu invoked from the Machine Setup menu cannot be

selected.

− Help

See Section 3.3 “Basic Operations” for the basic help operations.

8 − 5

(3) Head control menu

① How to start

When you click the right button of a trackball or the F9 key, the pop-up menu

appears. Select the desired item from the menu.

The unit which is not checked (not installed) at the “Option” setting of MS

parameters does not have any corresponding menu to be displayed.

This setting does not affect that of the “Device enable” menu invoked from

the Machine Setup menu: that is, not-checked (not used) units are

displayed also.

Note: 1)

Any MTC, MTS or IC conveyor belt is not displayed on the menu if its model

name is set (installed) on the “Device enable” menu invoked from the

Machine Setup menu.

2) While the pop-up menu is being displayed, the HOD keys operation is

invalid.

3) When the selected unit to be controlled is positioned where it cannot

move, you cannot select it (the unit is dimmed on the screen.)

② Menus

Notes: *1 The menu actually displayed varies depending on the model you use.

(See Figure 8.1.7.1 “List of the units that can be controlled by each model” on

the next page.)

*2 The menu actually displayed varies depending on the units installed at the

factory or setting of the Machine Setup menu.

8 − 6

1) XY move

Moves the selected head to the selected position along the XY, axes based on

the selection unit reference position.

You cannot select a menu item to which the selected head cannot move by

referring to the selected unit position.

You can move the head to the standard position by referring to the selected

control unit position or to the desired coordinates.

As the standard position, you can move the head to: the origin, CAL block first

mark position, waiting position (default, when a nozzle is removed, or

user-designated), reference pin position, follower pin position, MTC shuttle

pick-up position, component discarding position (IC, chip, large component),

VCS position, CVS position, bank mark position, vacuum calibration position and

so on.

When you select the position to which you want to move the head on the pop-up

menu, the head moves there by referring to the selected control unit position.

When you select to move the head to the desired coordinates, the “A given XY

coordinate move” dialog box appears on the screen as shown in Figure 8.1.7.

Figure 8.1.7 “A given XY coordinate move” dialog box

Select the unit to be controlled in the combo box.

You cannot select any unit which is not checked (not installed) at the “Option”

setting of the MS parameters.

This setting does not affect the setting of the “Device enable” menu invoked from

the Machine Setup menu (you can select a not-checked (not used) unit).

When you press the ALT key while holding the down arrow key, one of the

following list appears on the screen depending on the model you use.