KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第6页
III To tur n off power supply means to turn of f a power supply sw itch and then t o draw out a power plug fr om a receptacle or to separate the power cable f rom t he supply side. Hereinaf ter the sam e. Situations in W…
II
Matters of Caution Regarding Safety
To prevent accidents due to electric shock, turn off power supply if it is necessary to
open the electrical equipment box. For added precaution, open the lid of the box only
after a lapse of more than five minutes.
Basic Matters of Precaution
1. Be sure to read all documents included in this Manual and the attached booklet
before using this machine. Also, keep this Manual carefully so as to be able to
read it whenever necessary.
2. Contents of this Manual include items that are not included in specifications of the
machine purchased.
3. The machine should be operated only by the operator who has learned how to run
it.
4. Regarding the repair or maintenance (excluding daily inspection and other matters
specified in the Manual), ask our company or its agent to do it.
5. General maintenance, inspection, and repair (matters specified in this Manual) shall
be conducted only by specialized maintenance engineers who have finished the
maintenance course specified by our company.
With regard to repair (matters specified in this Manual), use genuine parts of our
company.
Safety Equipment, Alarm Label
1. In order to prevent accidents due to nonpresence of safety equipment, start to
operate this machine only after confirming that the equipment is suitably installed at
the specified position.
2. If the safety equipment is dismantled, be sure to attach it to its original position, and
confirm that it operates normally.
3. Make sure that the warning label stuck to the machine will be always clearly visible.
If it has been peeled off or stained, order new labels from our company and
exchange old labels with new ones.
4. If the safety equipment is damaged, remove it. Never operate the machine. If
you operate the machine without the safety equipment, it may lead to severe
accidents involving serious personal injuries or even death.
Application
1. Never use this machine for purposes other than its original application.
Our company will not be responsible in the case of its use for other application.
2. Do not remodel this machine. Our company will not be responsible for any
accident arising as a result of its remodeling.
Operational Training
1. To prevent accidents due to unaccustomed handling, operation of this machine
must be limited to operators who have participated in the operation training
specified by our company and have appropriate knowledge and operating skills.
DANGER
CAUTION
III
To turn off power supply means to turn off
a power supply switch and then to draw out
a power plug from a receptacle or to
separate the power cable from the supply
side.
Hereinafter the same.
Situations in Which It Is Necessary to Turn Off Power Supply
1. In the case of an abnormality or an accident, or in the event of power failure,
immediately turn off power supply.
2. In order to prevent accidents due to unintended start-up of the machine, carry out
inspection, repair, or cleaning of the machine only after turning off power supply.
3. When drawing out the power supply plug, do it by holding the plug itself, not the
cord.
Matters of Caution at Each of Its Use Stages
Transport
1. When lifting the machine or moving it, take sufficient safety measures so that no
dropping accidents will occur.
Unpacking
1. Read all instructions shown on the transport-use container.
2. Never cut tapes with a cutter.
3. Retain delivery-use materials.
Installation
1. To prevent the occurrence of any accident due to unintended moving of the
machine in operation, make casters float using a height adjuster.
2. Install this machine at a flat position.
3. To prevent the occurrence of electric shock, power leakage, or fires, use attached
products regarding cables, and link them to the specified positions.
4. To prevent electric shock, power leakage, or fires, make sure that irrational force
will be applied to the cables while the machine is in operation.
5. Securely fix the power supply plug and the connector of an I/F cable. When
drawing out the power supply plug or the I/F cable, do it by holding the connector
unit.
Before Operation
1. To prevent accidents to human bodies, make sure before supplying power that
there is no damage, coming off of parts, or loosening of connectors and cables.
2. To prevent bodily accidents, never put in your hand into the driving unit.
CAUTION
IV
Greasing
1. Regarding greasing, use Albania Grease.
2. To prevent the occurrence of an inflammation or rash, immediately wash the
related portions if grease adheres to your eyes or other parts of your body.
3. If grease is mistakenly swallowed, immediately consult a physician to prevent
diarrhea or vomiting.
Maintenance
1. To prevent accidents due to unaccustomedness, repair and adjustment shall be
conducted by maintenance engineers who are versed in the machine. In
replacing parts, use genuine parts of our company. We will not assume any
responsibility for an accident due to the use of non-genuine parts.
2. To prevent accidents or electric shock due to unaccustomedness, entrust
electrical repair or maintenance work (including wiring work) to persons versed in
electricity, or ask engineers of our company or its sales company to do it.
3. To prevent accidents due to unintended start-up of the machine, conduct repair or
adjustment only after removing air supply pipes and discharging residual air.
4. To prevent bodily accidents, confirm after such work as repair, adjustment, or
parts replacement that no screws or nuts are loosened.
Use Environment
1. Use the machine in the environment free from effects of noise sources (magnetic
waves), such as high-frequency welders, in order to prevent accidents due to
erroneous actions.
2. In order to prevent accidents due to erroneous actions, use the machine in the
environment where source voltage surpasses 200V (220V, 240V)± 10%.
3. In order to prevent accidents due to erroneous actions, do not use the machine in
the environment where the supplied air pressure is 0.5 to 1.0MPa.
4. To ensure safety, use the machine under the following environment:
Ambient temperature during operation + 10C - +35C
Relative humidity during operation 50% or less (35C)
90% or less (20C)
5. To prevent accidents due to breakdown of electric/electronic parts, turn on power
supply sufficiently after the fear of dew condensation is eliminated, because such
condensation may occur when the machine is rapidly moved from a cold place to a
warm location.
6. To prevent accidents due to breakdown of electric/electronic parts, stop the use of
the machine during lightning, and draw out the power supply plug.
CAUTION