KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第620页

8 − 31 (1) Con trol item Select a control it em with the corresponding radio butt on. (2) Contr ol position W ith the radio button select t he position when the conveyor is automatically controlled. Y ou cannot select th…

8 − 30

8.3.2 Transport system automatic control

When you select the [Conveyor] command on the [Ctrl] menu, then the [Automatic

control of conveyor] command, the following “Automatic control of conveyor” dialog

box appears on the screen.

Figure 8.3.2 Automatic control of conveyor dialog box

(Screen example when a KE-2030 is used)

Note: *1 The Control item “PWB move and clamp” and the menu items

“Between PWB Station moving” and “Control position” are

displayed with a KE-2030 only.

8 − 31

(1) Control item

Select a control item with the corresponding radio button.

(2) Control position

With the radio button select the position when the conveyor is automatically

controlled.

You cannot select the control position if the control item, “Initialization”, “PWB

ejection”, “PWB release” or “PWB check at WAIT/OUT snsr.” is selected.

(3) Between PWB Station moving

Select either of the two radio buttons: whether to move the conveyor between

the PWB stations or not.

You cannot select this menu item if the control item “Initialization”, “PWB

ejection” or “PWB release” is selected.

Note: You cannot select this menu item for models other than a KE-2030.

8 − 32

(4) Control position

With the corresponding radio button, select the position to be used when the

transport system is automatically controlled.

This item is not available when you select “Initialization” as the control item.

Note: "2 station" cannot be set with a model other than a KE-2030.

(5) Control button

Each control button executes the associated control item.

1) Initialization

This item initializes the PWB transport operation operation.

When the control item “Initialization” is checked, select the <EXEC> button,

or press the F3 key to control the initialization.

2) PWB load

This item loads a PWB according to the setting of "Positioning method".

When the control item “PWB load” is checked, select the <EXEC> button,

or press the F3 key to control the PWB loading.

3) PWB ejection

This item ejects a PWB.

When the control item “PWB ejection” is checked, select the <EXEC>

button, or press the F3 key to control the PWB ejection.

4) PWB release

This item releases a clamped PWB.

When the control item “PWB release” is checked, select the <EXEC>

button, or press the F3 key to control the PWB release.

5) PWB re-clamp

This item re-clamps a board located on the PWB transport path according

to the “Positioning method” selected.

When the control item “PWB re-clamp” is checked, select the <EXEC>

button or press the F3 key to control the PWB re-clamping function.