KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第631页
8 − 42 (2) Contr ol head Select a head t o be controlled f rom t he combo box. This selection will not aff ect the set ting of t he "Device enable" dialog box invoked fr om the Machine setup menu (you can selec…
8 − 41
8.4 VCS Control
8.4.1 VCS control (supported by a KE-2020 and KE-2040)
When you select the [Vision] command on the [Ctrl] menu, then the [Vision control]
command, the following "VCS control" dialog box appears on the screen.
Figure 8.4.1 VCS control dialog box
(1) Control unit
Select a unit to be controlled from the combo box.
Note that you cannot select a unit whose view type is not set (that is, not
installed) with the "Option" menu of the MS parameters.
This selection will not affect the setting of the "Device enable" dialog box invoked
from the Machine setup menu (you can select a unit not checked (that is, not
enabled)).
* When you press the down arrow key while holding down the Alt key, the
following list appears on the screen.
(KE-2020) (KE-2040)
8 − 42
(2) Control head
Select a head to be controlled from the combo box.
This selection will not affect the setting of the "Device enable" dialog box invoked
from the Machine setup menu (you can select a unit not checked (that is, not
enabled)).
Note: You can select the FMLA head only.
* When you press the down arrow key while holding down the Alt key, the
following list appears on the screen.
(KE-2020) (KE-2040)
(3) Control item
Select a control item with the corresponding radio button.
(4) Control button
With the control button, execute the control item you selected.
The displayed control buttons vary depending on the control item you selected.
1) Back light
This control item turns on and/or off the back light.
- When the control item "Back light" is checked, click the <ON>, <OFF> or
<ON/OFF> button or press the F3, F4 or F5 key to control the back light.
- If you click the <Setting> button or press the F6 key when the control item
"Back light" is checked, the "Light setting" dialog box appears on the
screen.
The state of the back light is updated when the back light is controlled
completely.
8 − 43
2) Side light
This control item turns on and/or off the side light.
- When the control item "Side light" is checked, click the <ON>, <OFF> or
<ON/OFF> button or press the F3, F4, or F5 key to control the side
light.
- If you click the <Setting> button or press the F6 key when the control item
"Side light" is checked, the "Light setting" dialog box appears on the
screen.
The state of the side light is updated when the side light is controlled
completely.
3) Bottom light
This control item turns on and/or off the bottom light.
- When the control item "Bottom light" is checked, click the <ON>, <OFF>
or <ON/OFF> button or press the F3, F4, or F5 key to control the bottom
light.
- If you click the <Setting> button or press the F6 key when the control item
"Bottom light" is checked, the "Light setting" dialog box appears on the
screen.
The state of the bottom light is updated when the bottom light is controlled
completely.
4) Front light
This control item turns on and/or off the front light.
- When the control item "Front light" is checked, click the <ON>, <OFF> or
<ON/OFF> button or press the F3, F4, or F5 key to control the front light.
- If you click the <Setting> button or press the F6 key when the control item
"Front light" is checked, the "Light setting" dialog box appears on the
screen.
The state of the front light is updated when the front light is controlled
completely.
5) All light
This control item turns on and/or off the all lights.
- When the control item "All light" is checked, click the <ON>, <OFF> or
<ON/OFF> button or press the F3, F4 or F5 key to control the all lights.
- If you click the <Setting> button or press the F6 key when the control item
"All light" is checked, the "Light setting" dialog box appears on the screen.
The state of the all lights is updated when the all lights are controlled
completely.