KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第638页
8 − 49 (4) Contr ol but ton Each contr ol item can be executed with the contr ol button. The display of the contr ol buttons varies depending on the control it em you selected. 1) T ape f eeding act ion This item feeds a…
8 − 48
(3) Kind of feeder
When selecting “Tape feeding action” as the control item, select the tape width
and feed pitch from the combo box.
This item cannot be set when the control item “Direct knock action” is selected.
◆
The following list appears when you press the ALT key and ↓ key at the
same time.
①
Tape width
②
Feed pitch
The available feed pitches vary depending on the tape width you selected.
8 − 49
(4) Control button
Each control item can be executed with the control button.
The display of the control buttons varies depending on the control item you
selected.
1) Tape feeding action
This item feeds a tape.
When the control item “Tape feeding action” is checked, select the< EXEC>
button, or press the F3 key to control the tape feed.
2) Direct knock action
This item executes knock operation per feeder bank.
When the control item “Direct knock action” is checked, select the< “EXEC>
button, or press the F3 or F4 key to control the direct knock.
3) FPI cont. (Independent)
This item turns on and/ or off the feeder position indicator.
When the control item “FPI cont.” is checked, select the <ON>, <OFF>,
<ON/OFF> or <BLINK> button, or press the F3, F4, F5 or F6 key.
4) FPI cont. (All)
This item turns on and/ or off the feeder position indicators on the front
feeder bank or rear feeder bank.
When the control item “FPI cont.” is checked, select the <ON>, <OFF>,
<ON/OFF)> or <BLINK> button, or press the F3, F4, F5 or F6 key.
8 − 50
8.5.3 DTS control
When you select the [Feeder] command on the [Ctrl] menu, then [DTS control]
command, the following "DTS control" dialog box appears on the screen.
Figure 8.5.3 DTS control dialog box
(1) Control item
Select a control item with the corresponding radio button.
(2) Speed
Select the speed to be controlled with the corresponding radio button.