KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第738页
12 − 8 12.5.1 Installing the Mat rix Tray Changer (MTC) 12.5.1.1 TR-4SN install st art positi on Figure 12.5.1. 1 Appearance of TR-4SN to be i nstalled CA UTION To avoid any accident caused by sudden activat ion of the m…
12 − 7
4) Connect the MTC power plug ② and signal connector ③ to the corresponding
jack/connector and the air tube to the MTC air fitting of the interface panel located
on the right side of the main unit.
Note: Be sure to use the cable and air tube supplied with the MTC.
Figure 12.5.3
② MTC power jack
③ MTC interface connector
④ MTC φ 6 tube inlet
12 − 8
12.5.1 Installing the Matrix Tray Changer (MTC)
12.5.1.1 TR-4SN install start position
Figure 12.5.1.1 Appearance of TR-4SN to be installed
CAUTION
To avoid any accident caused by sudden activation of the machine,
turn off the power.
12 − 9
12.5.1.2 TR-6SN/TR-6DN install start position
Figure 12.5.1.2 Appearance of TR-6SN/TR-6DN to be installed
CAUTION
To avoid any accident caused by sudden activation of the machine,
turn off the power.