KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第765页
13 − 9 13.2.6 Transport belt Check that the belt is severely worn-out, dam aged, or stretc hed. If it is necessary to replace the belt, follow the procedur e below. 1) Loosen t he screws used to fix the transpor t pulley…
13 − 8
13.2.5 Air filter (CAL block)
Check the element of the air filter (CAL block) for dirt. If the element is dirty, detach
the air tube and replace the filter with a new air filter (Part No. PF010001000).
Note: Install the air filter with its hole (part A) facing up.
WARNING
To prevent the body from injury which can be caused by accidental
activation of the machine, turn off the power of the machine before
following the operation above.
Air tube
Part A
13 − 9
13.2.6 Transport belt
Check that the belt is severely worn-out, damaged, or stretched. If it is necessary to
replace the belt, follow the procedure below.
1) Loosen the screws used to fix the transport pulleys (one at the front and the other
at the rear) attached to the long hole at part A in Figure 13.2.6.1, to untension the
transfer belt.
Figure 13.2.6.1
2) Loosen the flat screw or hexagonal-hole-headed bolt of the transport rails to
remove the transport belt guide. Then remove, then attach the transport belt.
Figure 13.2.6.2
WARNING
To prevent the body from injury which can be caused by accidental
activation of the machine, turn off the power of the machine before
following the operation above.
Part A
Part A Part A
Flat screw or
hexagonal-hole-headed bolt
13 − 10
13.2.7 Transport pulley
Check that the pulley turns without resistance.
If it is necessary to replace the pulley, follow the procedure below.
(1) Transfer pulley replacement
1) As shown in Figures 13.2.7.1 to 13.2.7.3, the transport pulleys are fixed at the
front and rear rail plates. Loosen the screws used to fix the pulleys to
replace them.
2) The same as for the transport belt replacement, perform tension adjustment
of the transport belt.
Figure 13.2.7.2
Figure 13.2.7.1
Figure 13.2.7.3
Hexagonal nut
Flat washer
Rail plate
Pulley spacer
Transfer pulley
Holding screw
Spring washer
Hexagonal nut
Flat washer
Rail plate
Pulley spacer
Transfer pulley
Holding screw
Spring washer
Rail plate
Transfer pulley
Holding screw
Flat washer