KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第768页

13 − 12 13.3 Cleaning 13.3.1 XY axis direct driv e unit Remove dirt, oil, etc. on t he XY axis direct drive unit. ① ATC unit ④ PW B transpor t unit ② Head unit ⑤ Feeder bank unit ③ X-Y unit Figure 13.3.1 ① ④ ⑤ ② ③

13 − 11

WARNING

To prevent the body from injury which can be caused by accidental

activation of the machine, turn off the power of the machine before

following the operation above.

13.2.8 Notice on Electricity

13.2.8.1 General notices

WARNING

Cut off the power to the machine before starting to disconnect or

connect the connectors.

CAUTION

Never use the machine with any voltage other than those specified.

Before switching on the machine, be sure that the machine is in a safe

conditions.

Before switching on the machine, be sure that there is no one who is

working in the machine.

Before switching on the machine, be sure that there are no obstacles

(tools and jigs) left in the machine.

Turn off the machine to supply air.

13.2.8.2 Daily routine checks

1. Make sure that the supply voltage is the rated voltage ± 10%.

2. Make sure that the connectors (of devices such as a keyboard and HOD) are all

seated firmly.

WARNING

To avoid a risk of serious injury or death caused by electric shock

hazard, turn off the main power switch of the house current which is

installed in the building where the machine is used.

Note that it is not the main power switch of the machine.

13 − 12

13.3 Cleaning

13.3.1 XY axis direct drive unit

Remove dirt, oil, etc. on the XY axis direct drive unit.

① ATC unit ④ PWB transport unit

② Head unit ⑤ Feeder bank unit

③ X-Y unit

Figure 13.3.1

①

④

⑤

②

③

13 − 13

(1) X axis

Check

Check that there is no dirt or dust on the rails of the X axis direct drive unit YR

and YL.

(2) Y axis

Check

Check to see if there is no dirt or dust on the rails of the Y axis direct drive unit.

WARNING

To prevent the body from injury which can be caused by accidental

activation of the machine, cut off the power to the machine before

starting to work.

① X-shaft direct-drive unit rail (x 2)

② X-shaft direct-drive unit (x 4)

① Y-shaft frame (x 2)

② Y-shaft direct-drive unit rail (x 2)

③ Y-shaft direct-drive unit (x 4)