KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第769页
13 − 13 (1) X axi s Check Check that there is no dir t or dust on t he rails of the X axis direct drive unit YR and YL. (2) Y axi s Check Check to see if ther e is no dirt or dust on the ra ils of t he Y axis direct driv…
13 − 12
13.3 Cleaning
13.3.1 XY axis direct drive unit
Remove dirt, oil, etc. on the XY axis direct drive unit.
① ATC unit ④ PWB transport unit
② Head unit ⑤ Feeder bank unit
③ X-Y unit
Figure 13.3.1
①
④
⑤
②
③
13 − 13
(1) X axis
Check
Check that there is no dirt or dust on the rails of the X axis direct drive unit YR
and YL.
(2) Y axis
Check
Check to see if there is no dirt or dust on the rails of the Y axis direct drive unit.
WARNING
To prevent the body from injury which can be caused by accidental
activation of the machine, cut off the power to the machine before
starting to work.
① X-shaft direct-drive unit rail (x 2)
② X-shaft direct-drive unit (x 4)
① Y-shaft frame (x 2)
② Y-shaft direct-drive unit rail (x 2)
③ Y-shaft direct-drive unit (x 4)
13 − 14
13.3.2 Transport sensors
Remove dirt and dust on the sensors.
WARNING
To prevent the body from injury which can be caused by accidental
activation of the machine, turn off the power of the machine before
following the operation above.
Wait sensor Stop sensor C-OUT sensor
Stopper
Out sensor
Transport
direction
In sensor
Input buffer
station
Centering
station
Output buffer
station