KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第8页
V Where to stick warning labels [Front] [Rear] Moving parts warning label "Take care not to be caught in the machine" warning label Moving parts warning label "Take care not to be caught in the machine&quo…
IV
Greasing
1. Regarding greasing, use Albania Grease.
2. To prevent the occurrence of an inflammation or rash, immediately wash the
related portions if grease adheres to your eyes or other parts of your body.
3. If grease is mistakenly swallowed, immediately consult a physician to prevent
diarrhea or vomiting.
Maintenance
1. To prevent accidents due to unaccustomedness, repair and adjustment shall be
conducted by maintenance engineers who are versed in the machine. In
replacing parts, use genuine parts of our company. We will not assume any
responsibility for an accident due to the use of non-genuine parts.
2. To prevent accidents or electric shock due to unaccustomedness, entrust
electrical repair or maintenance work (including wiring work) to persons versed in
electricity, or ask engineers of our company or its sales company to do it.
3. To prevent accidents due to unintended start-up of the machine, conduct repair or
adjustment only after removing air supply pipes and discharging residual air.
4. To prevent bodily accidents, confirm after such work as repair, adjustment, or
parts replacement that no screws or nuts are loosened.
Use Environment
1. Use the machine in the environment free from effects of noise sources (magnetic
waves), such as high-frequency welders, in order to prevent accidents due to
erroneous actions.
2. In order to prevent accidents due to erroneous actions, use the machine in the
environment where source voltage surpasses 200V (220V, 240V)± 10%.
3. In order to prevent accidents due to erroneous actions, do not use the machine in
the environment where the supplied air pressure is 0.5 to 1.0MPa.
4. To ensure safety, use the machine under the following environment:
Ambient temperature during operation + 10C - +35C
Relative humidity during operation 50% or less (35C)
90% or less (20C)
5. To prevent accidents due to breakdown of electric/electronic parts, turn on power
supply sufficiently after the fear of dew condensation is eliminated, because such
condensation may occur when the machine is rapidly moved from a cold place to a
warm location.
6. To prevent accidents due to breakdown of electric/electronic parts, stop the use of
the machine during lightning, and draw out the power supply plug.
CAUTION
V
Where to stick warning labels
[Front]
[Rear]
Moving parts
warning label
"Take care not to be
caught in the machine"
warning label
Moving parts
warning label
"Take care not to be
caught in the machine"
warning label
High voltage
warning labels
High voltage
warning labels
Moving parts
warning label
High voltage
warning labels
Moving parts
warning label
VI
Matters of Caution for Safe Use of
KE-2010M/KE-2010L/KE-2010E
DANGER
1. To prevent accidents due to electric shock, do not open the
electrical equipment box while power supply is on.
2. To prevent electric shock, do not operate the machine, with the
grounding line unlinked.
CAUTION
1.
To prevent damage to human bodies, do not operate the
machine, with the safety cover or equipment removed.
2.
To prevent damage to human bodies, make sure that hair,
clothes, etc., will not be caught by the conveyor chain. Also,
keep off gloves.
3.
To prevent damage to human bodies, turn off power supply
during maintenance (greasing, adjustment, and daily
inspection).
4.
To prevent damage to human bodies, use an earth leakage
breaker for the power line.
CAUTION
1.
Windows NT (including the Ethernet communication function) is
adopted as the Operating System of this machine.
If you install on this machine any software not designed for this
machine, we cannot guarantee that the machine functions
properly. if you move, rename or copy a file stored in the
hard disk drive, we cannot guarantee that either.
•
Should the machine not properly due to any operation above,
replace your hard disk drive with new one and your data may
be lost.
CAUTION
1.
A UPS is incorporated into this machine to protect a production
program and any other data at power failure.
To prevent a battery built into the UPS from degrading, do not
leave this machine without turning it on for six months or longer.
•
Only when the main circuit breaker and main switch are set
to ON, this machine is assumed to be turned on.