KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第807页

2 Error M essages on T eaching Error code Message E190000 A system error occurred. Load library E190001 A system error occurred.| Find resource E190002 A system error occurred. Load resource E190003 A system error occurr…

A. ERROR LIST

This chapter lists error messages and another necessary information displayed on the screen.

Each of error codes is preceded by a letter which identifies the type of the event: E for Error

E 999999 Error codes

Q 999999 Error codes The serial number "999999" represents the content of the event.

Error Messages on Application Management

Error code Message

E100010 Failed to initialize the Windows Socket

E100020 Failed to initialize OLE. Confirm the OLE Library version

E102010 Fatal system error occurred. Abort the process

E102020 You tried to start up, before the end of the previous system program. Exit the system

program, and start again

E102100 There was a fatal failure while starting the KE-2000 system. Avoiding the possible

damages, the system is going to abort the process. (error code = %d)

E102900 System is closing all processes. And getting into the shut-down process. Are you sure?

E105010 Fatal error occurred in constructing memory structure. Abort the process

W105110 The saving program has no name. Please put the name?

W105120 The same named file exists. Do you want to overwrite the file?

E106010 Failed to start the data-manager. Abort the process

W106020 Illegal password. Retrieve the default group settings

E107100 Failed to create asynchronous threads. Abort the process

E108010 Failed to start up MC system. Abort the process

E109110 Fatal error occurred in constructing axes structure. | Abort the process

E109120 Fatal error occurred in initializing axes. Abort the process

E109130 Failed to originate, Please retry

E109210 Failed to initialize DTS

E109220 Error was detected in checking if any nozzles attached

W109221 There are some attached nozzles

W109230 Each I/O is moving to the own safe position, OK?

Error Messages on Teaching

Error code Message

E190000 A system error occurred. Load library

E190001 A system error occurred.| Find resource

E190002 A system error occurred. Load resource

E190003 A system error occurred

E190004 A system error occurred. Timer acquisition

E191000 A system error occurred. Load library

E191001 A system error occurred. Find resource

E191002 A system error occurred. Load resource

E191003 A system error occurred

E191004 A system error occurred. Timer acquisition

E191100 Camera type has not been selected. Please choose camera type and teach again

E191101 The contrast for the entire image is too low. Please modify the conditions and teach again

E191102 The template has no features. Please modify the conditions and teach again

E191103 Failed to automatically learn the recognition conditions of template. Details : %d Please

modify the conditions and teach again

Q191300 There is a similar pattern in the upper part of the template. Would you like to take the

teaching results in?

Q191301 There is a similar pattern in the lower part of the template. Would you like to take the

teaching results in?

Q191302 There is a similar pattern on the left side of the template. Would you like to take the

teaching results in?

Q191303 There is a similar pattern on the right side of the template. Would you like to take the

teaching results in?

Q191304 The template does not have enough contrast. Would you like to take the teaching results

in?

Q191305 The template has no features. Would you like to take the teaching results in?

Error Messages on Machine Operations (Tracking)

Error code Message

E240000 The axis cannot be moved

E240001 The axis cannot be moved to escape point

E240002 Yc table cannot be moved

E240003 The axis margin out of range. It is not possible to operation

E240004 The interrupt which was not able to operate was detected. The trace is ended

E240005 The area sensor was detected. Please remove the sensor reaction factor

E240006 The feeder float sensor was detected. Please remove the sensor reaction factor

E240007 Input is mistake

E240008 There is no data previous

E240009 There is no data next

E240010 Specified device cannot be used

E240011 The station is different

E240012 Specified position not move

E240013 The origin point return is non-completion

E240014 The Left OCC device is set in unused by the setup

E240015 The Right OCC device is set in unused by the setup

E240016 The HMS device is set in unused by the setup

Q240500 End tracking?

E241000 Memory allocation error

E241001 Specified device cannot be used

E241002 The station is different

E241003 Specified position not move

E241004 The input value is illegal (%s)

E241005 Index of component data has irregularities (%d)

E241008 Supply of the component is not assign

E241009 Centering of the component is no laser

E241010 Centering of the component is not assign

E241011 No pick data

E241013 Component data is incomplete

E241014 Index of pick data has irregularities. (%d)

E241015 Pick data is incomplete

E241016 Setting the nozzle has not been allocated to ATC. Allocate the nozzle to ATC using TC

nozzle setup function when machine setup. Nozzle no. : %d

E241018 There is no pick data available

E241020 There is no input character

E241021 Input character has irregularities

E241022 Input value exceeds predetermined data range. (Data range : %s - %)

E241023 Component size is too big

E241024 The start no. is larger than the end no.

W241025 Measurement item is not selected

E241026 There is not a measurement possible component

E241028 There is not a inspection possible component

I241200 A continuous measurement ended

I241201 A continuous inspection ended

Q241300 Do you interrupt process?

Q241301 A noz. When calculated from the outline that measured and a noz. When at present is set

up differes. A calculation noz. No. : %3d A setting noz. No. : %3d Does it renew a noz.?

When a noz. Is renewed vacuum level is initialized