KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第810页
5 Error Messages on Feeder Bank Recognition Error code Message E249001 The origin point return is non-completion. Please operate again after completing the origin point return E249002 The OCC device is unused. T he bank …
4
Q241302 A nozzle number when calculated from the measurement result and a nozzle number when
at present is set up differes. Is the nozzle exchanged?
Q241303 A pick position is changed. Does it renew a pick data?
E241305 The measurement error occurred. Do you start single measurement?
E241306 The size relation of length and width does not agree with data. | Width : %s(%s)
length : %s(%s) There is possibility that the setting of outline or direction are not fitting. Do
you reflect the measurement result in the component data?
E241307 The inspection error occurred. Do you start single inspection?
Q241308 Is the measurement ended?
Q241309 Is the inspection ended?
E241500 There is no verification device
E241501 The verification device is an unused unit
E241502 Supply of the component is no CVS
E241503 The inspection error occurred
5
Error Messages on Feeder Bank Recognition
Error code Message
E249001 The origin point return is non-completion. Please operate again after completing the origin
point return
E249002 The OCC device is unused. The bank mark recognition is aborted
E249003 The stop key was pressed. The bank mark recognition is aborted
E249004 The axis cannot be moved to recognition position. The bank mark recognition is aborted
E249005 The bank mark recognition error. The bank mark recognition is aborted
E249006 MTS power off
E249007 MTS cannot move because of cover opening
E249008 The door of MTS opens
E249009 MTS offline
E249010 Servo is in the free state. The bank mark recognition is aborted
Q249051 Feeder bank has descended. Do you want to lift the feeder bank up and continue the bank
mark recognition?
I249070 Set online for MTS
I249071 Please close the door of MTS
6
Error Messages on Teaching (for helping you to edit a program)
Error code Message
E290000 The origin point return is non-completion. Please execute the teaching after the origin point
returns
E290001 The OCC device is set in unused by the setup. The teaching in the OCC device cannot be
done
E290002 The bad mark reader device is set in unused by the setup. The teaching in the bad mark
reader device cannot be done
E290003 The HMS device is set in unused by the setup. The teaching in the HMS device cannot be
done
E290004 The pick up point in the right feeder bank cannot be the teaching with a left device. Please
use a right device
E290005 The pick up point in the left feeder bank cannot be the teaching with a right device. Please
use a left device
E290006 The memory access error occurred
E290007 The Head device is set in unused by the setup
E290008 HW error. Execution is aborted
Q290500 It is not possible to move to specified position with this device. Please push ‘No’ when you
discontinue ‘Yes’ when the teaching is started from the current position
Q290501 The teaching operation is executed. Please confirm safety. Please push ‘No’ when you
discontinue ‘Yes’ when executing this
Q290502 The position cannot be corrected. Please push ‘No’ when you discontinue ‘Yes’ when
correction is not considered and teaching is executed
Q290503 The mark has already been registered. Do you overwrite?