KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第818页
13 Error M essages on Warming Up Operat ions Error code Message E398001 Memory allocation error E398002 Shared memory open error E398011 There is no input character E398012 Input character has irregularities E398013 Inpu…
12
Error Messages on Idle Mode Operations
Error code Message
E397001 Memory allocation error
E397002 Shared memory open error
E397011 Return to home has not yet been completed
E397012 Servo is in the free state
13
Error Messages on Warming Up Operations
Error code Message
E398001 Memory allocation error
E398002 Shared memory open error
E398011 There is no input character
E398012 Input character has irregularities
E398013 Input value exceeds predetermined data range. (Data range:%d - %d)
W398021 Return to home has not yet been completed
W398022 Servo is in the free state
W398031 There is WB on conveyor. Remove the PWB
W398041 MTC power off
W398042 MTC offline
E398101 Error has occurred on driver. %s code:%d
Q398601 Do you interrupt process?
I398701 Warm-up is finished. %s:%d
14
Error Messages on Setting of the Safe Direction of Each I/O Device
Error code Message
E399101 Memory allocation error
E399102 Shared memory open error
W399111 Return to home has not yet been completed
W399112 Servo is in the free state
Q399201 Do you continue reset I/O?
Q399211 cannot return component of %s. Trash component?
I399301 Remove the component from %s
I399311 Set online for MTC
I399312 Set online for MTS