KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第836页

31 E630207 Vision System: It is unprescribed ERR code. ERR7 code E630208 Vision System: It is unprescribed ERR code. ERR8 code E630209 Vision System: It is unprescribed ERR code. ERR9 code E630210 Vision System: Video Sy…

Error Messages on the Vision Centering System

Error code Message

E630001 ViLib Entry : Failed in initializing.

E630002 ViLib Entry : Un-initilizing error occurred

E630003 ViLib Thread:Driver Failed to get Thread starated

E630010 There is no empty space in the Vision Resource Semaphore

E630011 ViLib Thread: Failed in registration of bass interrupting

E630012 ViLib Thread: Failed to open the serial port.

E630050 ViLib Entry: IPC Send Error(Entry->Thread) occurred

E630051 ViLib Entry: IPC Receive Error(Entry<-Thread) occurred

E630052 ViLib Entry:Error Execute Undefined Command

E630053 ViLib Thread: Undefined ViOS event is requested

E630073 Vision Data: Ball patter has not been set yet

E630074 Camera scale has not been set yet

E630075 The window frame does not fit in the screen

E630081 There is not valid mark within the detecting window

E630100 Vision System: The parameter value is illegal

E630101 Vision System: parameter count is wrong

E630102 Vision System: You tried to register an undefined component or mark

E630103 Vision System: Component ID number is invalid

E630104 Vision System: Undefined command was issued

E630105 Vision System: Recognition conditions are not enough

E630106 Vision System: There is not enough storage of the user defined template

E630107 Vision System: You are ran out of the resources for the general vision component data

E630108 Vision System: The component is not supported as General Vision component

E630109 Vision System: It is unprescribed NAK code. NAK9 code

E630110 Vision System: A physical error of FLASH occurred

E630111 Vision System: There is not enough space in FLASH

E630112 Vision System: System error of FLASH occurred

E630113 Vision System: Current cabinet is UNTITLED

E630114 Vision System: There are several templates with the same ID

E630115 Vision System: It is unprescribed NAK code. NAK15 code

E630116 Vision System: It is unprescribed NAK code. NAK16 code

E630117 Vision System: It is unprescribed NAK code. NAK17 code

E630118 Vision System: It is unprescribed NAK code. NAK18 code

E630119 Vision System: It is unprescribed NAK code. NAK19 code

E630120 Vision System: There is no cabinet file

E630121 Vision System: The cabinet file already exists

E630122 Vision System: Failed to open the cabinet file

E630123 Vision System: An error of reading the cabinet file

E630124 Vision System: An error of writing the cabinet file

E630125 Vision System: A data error of the cabinet file

E630200 Vision System: A bass error occurred. Hardware abnormality

E630201 Vision System: An address error occurred. Hardware abnormality”

E630202 Vision System: A spurious interruption error occurred. Hardware abnormality

E630203 Vision System: It is unprescribed ERR code. ERR3 code

E630204 Vision System: It is unprescribed ERR code. ERR4 code

E630205 Vision System: It is unprescribed ERR code. ERR5 code

E630206 Vision System: It is unprescribed ERR code. ERR6 code

E630207 Vision System: It is unprescribed ERR code. ERR7 code

E630208 Vision System: It is unprescribed ERR code. ERR8 code

E630209 Vision System: It is unprescribed ERR code. ERR9 code

E630210 Vision System: Video Synch. Time out error occurred. Hardware abnormality

E630211 Vision System: A time-out error of the serial communication occurred

E630212 Vision System: An error in capturing an image occurred. Hardware abnormality

E630213 Vision System: An error occurred in the internal driver

E630214 Vision System: The running command got a time-out

E630215 Vision System: It is unprescribed ERR code. ERR15 code

E630216 Vision System: It is unprescribed ERR code. ERR16 code”

E630217 Vision System: It is unprescribed ERR code. ERR17 code

E630218 Vision System: It is unprescribed ERR code. ERR18 code

E630219 Vision System: It is unprescribed ERR code. ERR19 code

E630300 ViLib Thread: Other illogical matter occurred

E630301 ViLib Thread: Turnaround time-out occurred

E631010 ViRecog Error: No mark can be found. Please examine the PWB

E631011 ViRecog Error: The mark is touching the frame. Please examine Mark data

E631012 ViRecog Error: The consistency of the marks is too low. Please examine the PWB

E631013 ViRecog Error: Other mark recognition error occurred. Please examine the mark data

E631020 ViRecog Error: The lead is bent. Please examine the component

E631021 ViRecog Error: The position of the lead tip is illegal. Please examine the component

E631022 ViRecog Error: Lead pitch is wrong. Please examine Vision data

E631023 ViRecog Error: Some leads are missing. Please examine Vision data

E631024 ViRecog Error: The number of leads is too large. Please examine Vision data”

E631025 ViRecog Error: Failed to detect leads. Please examine the picking posture

E631026 ViRecog Error: The number of leads is too small. Please examine Vision data

E631027 ViRecog Error: Failed to find lead(s). Please examine Pick position

E631028 ViRecog Error:Mis-recognized the fine pitch lead. Please examine Light conditions

Q631180 There is a similar pattern in the upper part of the template. Would you like to take the

teaching results in?

Q631181 There is a similar pattern in the lower part of the template. Would you like to take the

teaching results in?

Q631182 There is a similar pattern on the left side of the template. Would you like to take the teaching

results in?

Q631183 There is a similar pattern on the right side of the template. Would you like to take the

teaching results in?

Q631184 “The template does not have enough contrast. Would you like to take the teaching results

Q631185 The template has no features. Would you like to take the teaching results in?

E631186 The contrast for the entire image is too low. Please modify the conditions and teach again”

Q631200 The light is getting darker. Please clean the light

E631201 The light is too dark. Please clean the light

E631202 The light is not ON. Please examine it

Error Messages on PWB Transport Conveyor/Automatic PWB Transport /Idle PWB Transport

Error code Message

W650009 Conveying device error: | Since a PWB which interferences the check cylinder, | the cylinder

can not come up. | Please remove the PWB

E650010 Conveying device error: | Due to the abnormality of the check cylinder sensor, | cylinder can

not come up. | Please re-start the machine and check again

E650100 Conveying error : An asynchronous, abnormal event occurred while PWB conveying. The

process is forcibly terminated

W650203 PWB Conveying Error: There is no PWB objective to be conveyed

W650204 PWB Clamp Error : There is no PWB objective to be unlocked

W650205 Conveying Error : Please carry out the PWB on the Exit side station prior to the one on the

Entrance side station

W650209 PWB Conveying Error : A PWB has been detected on the conveying route. Please remove it

W650211 PWB Conveying Error : A PWB has been detected on the center station. Please remove it

W650212 PWB Conveying Error : A PWB has been detected on the center station on the Entrance

side. Please remove it

W650213 PWB Conveying Error : A PWB has been detected on the center station on the Exit side.

Please remove it

W650214 PWB Conveying Error : A PWB has been detected on the OUT buffer. Please remove it

W650219 PWB Conveying Error : In operation of PWB conveying

E650221 PWB Conveying Error : Illegal input buffer motor movement. The process is forcibly

terminated. Please remove on the conveying route

E650222 PWB Conveying Error : PWB conveying error of Input buffer. The process is forcibly

terminated. Please remove on the conveying route

E650223 PWB Conveying Error: PWB conveying error of Input buffer. The process is forcibly

terminated. Please remove on the conveying route”

E650224 PWB Conveying Error : PWB conveying time out error of Input buffer. The process is

forcibly terminated. Please remove on the conveying route

E650234 PWB Conveying Error : PWB conveying time out error of the center station. The process is

forcibly terminated. Please remove on the conveying route

E650242 PWB Conveying Error : PWB conveying error of the center station on the Entrance side.

The process is forcibly terminated. Please remove on the conveying route

E650243 PWB Conveying Error : PWB conveying error of the center station on the Entrance side.

The process is forcibly terminated. Please remove on the conveying route

E650244 PWB Conveying Error : PWB conveying time out error of the center station on the Entrance

side. The process is forcibly terminated. Please remove on the conveying route

E650252 PWB conveying error of the center station on the Exit side. The process is forcibly

terminated. Please remove on the conveying route

E650253 PWB Conveying Error : PWB conveying error of the center station on the Exit side. The

process is forcibly terminated. Please remove on the conveying route

E650254 PWB Conveying Error : PWB conveying time out error of the center station on the Exit side.

The process is forcibly terminated. Please remove on the conveying route

E650262 PWB Conveying Error : PWB conveying error of Output buffer. The process is forcibly

terminated. Please remove on the conveying route

E650264 PWB Conveying Error : PWB conveying time out error of Output buffer. The process is

forcibly terminated. Please remove on the conveying route

E650265 PWB Conveying Error : PWB conveying time out error of Output buffer. The process is

forcibly terminated. Please remove on the conveying route

E650271 Clamp error : Backup plate of the center station went up illegally. The process is forcibly

terminated. Please remove on the conveying route

E650272 Clamp error : Time-out occurred while backup plate of the center station went up. The

process is forcibly terminated. Please remove on the conveying route

E650273 Clamp error : Backup plate of the center station went down illegally. The process is forcibly

terminated. Please remove on the conveying route

E650274 Clamp error : Time-out occurred while backup plate of the center station went down. The

process is forcibly terminated. Please remove on the conveying route