KE2010.Instruction Manual.Ver.2.01,Rev.08 - 第898页
93 E506102 “Would you like to resume t he production? The last suspended position %s %s” [Cause] T his m es sage appears if the produc tion program is a r esum able produc tion when starting a produc tion. (For 2030) ?? …
92
E503401 “The Production start No. that is currently set(%s) is larger than the
one(Left:%s Right:%s) of when the production got suspended
illegally last time. Would you like to start the production though the
PWB may become incomplete?”
[Cause] This message appears if current production start No. is larger than the one of
when the production got suspended illegally last time when resuming the
production.
[Treatment] OK button : Starts the production with current production start No.
(Placement data index) being larger than the previous one.
There is a possibility that PWBs will be incomplete.
Cancel button : Will have you back to the status that is before pressing START key.
E503402 “The Production stop No. that is currently set (%s) us smaller than
the one (Left:%s Right:%s) of when the production got suspended
illegally last time. Would you like to start the production though the
PWB may become incomplete?”
[cause] This message appears if current production stop No. is smaller than the one of
when the production got suspended illegally last time when resuming the
production.
[Treatment] OK button : Starts the production with current production stop No.
(Placement data index) being smaller than the previous one.
There is a possibility that PWBs will be incomplete.
Cancel button : Will have you back to the status that is before pressing START key.
E503500 “No completion change plan. Please use Feeder Bank”
[Cause] This message appears if Non-stop production is set in the Operation Option and
the feeder bank on the front side is descending down when reading a file in.
[Treatment] Please have the feeder bank ascend.
E506100 “You can resume the production from the last suspended position
|%s|%s| Would you like to resume the production?”
[Cause] This message appears if the production is resumable when reading a file in.
?? : Resumptive production starting position of each station.
[Treatment] Yes : Starts the production from the placement point which got illegal abortion
last time.
No : Will not resume the production but start a normal production that is set in
the Production Condition.
E506101 “You need to delete the file if you do not resume the production
from the last illegally suspended position.
%s
%s
Would you
like to delete the file?”
[Cause] This message appears if you select ‘do not resume the production’ when you are
asked if to resume the production when reading a file in or the Production screen
got started.
[Treatment] Yes : Deletes the resumable production file. If you delete the file, you can no
longer resume the production from the point where the production got
illegal abortion.
No : Will not delete the resumable production file.
93
E506102 “Would you like to resume the production? The last suspended
position
%s
%s”
[Cause] This message appears if the production program is a resumable production when
starting a production.
(For 2030)
?? : Resumptive production starting position of each station.
[Treatment] Yes : Starts the production from the placement point which got illegal abortion
last time.
No : Will not resume the production but start a normal production that is set in
the Production Condition.
E506200 “You can resume the production from the last suspended position
[Circuit No. : %d Step No. : %d] Would you like to resume the
production?"
[Cause] This message appears if the production program is a resumable production when
starting a production.
(For 2030)
?? : Resumptive production starting position of each station.
[Treatment] Yes : Starts the production from the placement point which got illegal abortion
last time.
No : Will not resume the production but start a normal production that is set in
the Production Condition.
E506201 “You need to delete the file if you do not resume the production
from the last illegally suspended position. [Circuit No. : %d Step
No. : %d] Would you like to delete the file?”
[Cause] This message appears if the production program is a resumable production when
starting a production.
(Other than 2030)
?? : Resumptive production starting position of each station.
[Treatment] Yes : Starts the production from the placement point which got illegal abortion
last time.
No : Will not resume the production but start a normal production that is set in
the Production Condition.
E506202 “Would you like to resume the production? The last suspended
position [Circuit No. : %d Step No. : %d]”
[Cause] This message appears if the production program is a resumable production when
starting a production.
(Other than 2030)
?? : Resumptive production starting position of each station.
[Treatment] Yes : Starts the production from the placement point which got illegal abortion
last time.
No : Will not resume the production but start a normal production that is set in
the Production Condition.
94
E506300 “Is the component supply reset?”
[Cause] This message appears when ‘replenishment button’ on the Pause screen is
pressed.
[Treatment] Yes : Replenishes components.
No : Will not replenish components.
E506400 “The %s component is a protective component. Please remove the
component”
[Cause] This message appears before disposing the component if a protective component
is being picked by a head when starting a production.
? : head
[Treatment] OK button : Moves the head to the component disposal position.
E506401 “Cannot return component of %s. Trash component?”
[Cause] This message appears when starting a production if a component is being picked
by a head, the component is not a protective component, and the component
disposal is executed for the component that is un-returnable.
[Treatment] Yes : Disposes the component.
No : Resumes the production without disposing the component
E506500 “More than one component are selected. Would you like to try
execute Verification inspection for the first component listed?”
[Cause] This message appears if several components are selected to be verified when
executing the Verification inspection for the retry list.
[Treatment] Yes : Executes the Verification inspection for the first component listed.
No : Will not executes the Verification inspection.
E508001 “Pause as component protection. Take off component”
[Cause] This message appears before disposing a protective component while a
production.
[Treatment] Please take the component off and press OK button.
E508100 “Set online for MTS”
[Cause] This message appears if MTS is not online when starting a production.
[Treatment] Please put MTS in online status and press OK button. Pressing Cancel button will
have you back to the status that is before pressing START key.
E508101 “Please close the door of MTS”
[Cause] This message appears if the MTS door is open when starting a production.
[Treatment] Please close the MTS door and press OK button. Pressing Cancel button will
have you back to the status that is before pressing START key.
E508200 “Remove the component from %s”
[Cause] This message appears when starting a production after a request of taking a
protective component off is issued and the head is moved to the component
disposal position.
[Treatment] Please take the component off the head and press OK button.
E508300 “The cause of the pause is not out of component. Measurement