1OM-1603-006_w.pdf - 第144页

1OM-1603 3-19 2. Pattern Program Change : Chap.3 2.2.6.1 T ape Feeder Attachment F1C13-2 CAUTION When you need to bend down to perform work, you may hit your head on the tape feeder worktable and get injured. Procedure (…

100%1 / 229
1OM-1603
3-18
2. Pattern Program Change : Chap.3
2.2.6 How to Use the Feeder Set Jig
The feeder set jig is a table for the tape feeder to x it temporarily when the
component reload work is performed for the tape feeder where the splicing
operation is not to be performed. Also, the power can be supplied from the main
machine using the tape feeder setting connector and a cable. This jig enables the
operator to perform the component reload work or adjustment work for each tape
feeder.
F1C13-1
[1] Tape Feeder Holding Guide
This guide holds the tape feeder when a single tape feeder is adjusted.
[2] Tape Feeder Fixing Base
This base is used to put the tape feeder on it.
[3] Tape Feeder Power Connector Socket
This connector is used for tape feeder DC power output.
[4] Tape Feeder Connecting Cable
Using this cable, the tape feeder power connector is connected to the tape
feeder connector to supply the power to the tape feeder.
1108-001
1OM-1603
3-19
2. Pattern Program Change : Chap.3
2.2.6.1 Tape Feeder Attachment
F1C13-2
CAUTION
When you need to bend down to perform work, you
may hit your head on the tape feeder worktable and
get injured.
Procedure
(1) Remove the tape feeder where components are to be reloaded, from the
feeder base on the bank feeder change cart and attach it onto the tape feeder
holding guide.
(Insert the tape feeder slowly along the tape feeder holding guide to the end).
Insert it to the end.
F1C13-3
1108-001
1OM-1603
3-20
2. Pattern Program Change : Chap.3
(2) Attach the tape feeder power connector socket onto the main machine.
Tape Feeder Power Connector Socket
F1C13-4
(3) Connect the tape feeder connecting cable that has been attached to the main
machine with a magnet, to the tape feeder with the bracket turned down.
(One second after it is connected, the components can be reloaded or the
machine can be adjusted).
Connect it with
the bracket turned down.
F1C13-5
CAUTION
When the tape feeder connecting cable is connected
to the tape feeder, unless the tape feeder is held
securely, the tape feeder holding guide may come
off and drop from the tape feeder unit. Connect the
cable with the tape feeder held securely.
1108-001