00193790-01 - 第78页
2 English Installat ion and Getting Started with CACCIA 2.4 System Requirements Issue 07/2004 12 2.4 System Requirements The syste m configu ratio ns recomm ended fo r CACCIA a re desc ribed i n the foll owing sec tions …
Installation and Getting Started with CACCIA 2 English
Issue 07/2004 2.3 Scope of Delivery
11
2.3 Scope of Delivery
The CACCIA program is supplied with the following two software and hardware packages and is
for use by service personnel only. These packages contain the following software, hardware and
documentation items:
– Package 1: SW CACCIA terminal program item no.: 00375930-01:
- CACCIA Service SW V1.0, CD set item no.: 00375940-01
- CACCIA Installation and Getting Started documentation
(German / English) item no.: 00193790-01
- Product certificate item no.: 00341683-01
- Packaging for software CD-ROM/disk item no.: 00066212-01
– Package 2: CAN bus hardware for CACCIA item no.: 00375925-01
- LAPCan CAN bus card item no.: 00349514-01
- DRVCan 251 CAN cable item no.: 00349676-01
- CAN bus test cable item no.: 00349679-03
- CAN terminating resistor item no.: 00349740-01
2.3.1 Additional Equipment Required
The following components are required for CACCIA and are not yet included in the Siemens AG
delivery. These system components need to be acquired from the relevant manufacturers:
– CAN card for laptop (CANBLUE, CANAS, USBCAN, including driver software)
– CAN card for PC (CANBLUE, USBCAN, ESD, SIE, CANDY, PCAN, SOFTING,
KVASER_USB, including driver software)
– Flat ribbon cable with two 9-pin SubD connectors and two terminating resistors (120 Ohm
each) for the self-test function
– CAN bus cable (connects CAN card to SIPLACE)
2.3.1.1 Tools Required
– Standard tools
2 English Installation and Getting StartedwithCACCIA
2.4 System Requirements Issue 07/2004
12
2.4 System Requirements
The system configurations recommended for CACCIA are described in the following sections of
this manual.
2.4.1 Recommended Configuration for Hardware
The following hardware requirements are necessary for successful installation of CACCIA.
2.4.1.1 PC
– Windows NT version 4.0 or higher/ Windows 2000 / Windows XP
– At least 128 MB main memory
– Diskette drive
– Monitor with 1280 x 1024 resolution
– Keyboard and mouse
– Available PCI or USB slot (depending on board)
– CD-ROM drive
– USB connection for Memory Stick (if installed)
2.4.1.2 Laptop
– Windows NT version 4.0 or higher/ Windows 2000 / Windows XP
– At least 128 MB main memory
– Available PCMCIA slot, USB slot
– CD-ROM drive
Installation and Getting Started with CACCIA 2 English
Issue 07/2004 2.4 System Requirements
13
2.4.2 Software Configuration
The following software configuration is necessary for successful installation of CACCIA:
– Windows NT (SVP 6)
(available via ..Tools / Common / Service packs on the installation CD)
– Windows 2000 (SVP 3)
(available via www.windows-update.com)
–WindowsXP(SVP1)
(available via www.windows-update.com)
– Administration rights for the computer during installation