196396 Iss 2 Nov 2015 - Semi Appendix Manual - 第10页
TRI COLOUR BEACON The beacon indicates the operational status of the machine: Machine is not operational System power is down Error message displayed Paste cartridge is low ProFlow is low Paper roll is empty Solvent tank…
Appendix to Micron Technical Manuals
APPENDIX A
Operator Information
TRI COLOUR BEACON
The beacon indicates the operational status of the machine:
Machine is not operational
System power is down
Error message displayed
Paste cartridge is low
ProFlow is low
Paper roll is empty
Solvent tank level is low
Machine is not in a ready state
Machine is initialising
Machine is in set up
Machine is in maintenance
Machine requires operator attention
Paste cartridge is low
ProFlow is low
Paper roll is empty
Solvent tank level is low
Machine is operational
Machine is waiting in a ready state
Beacon Colour Operational Status
EMERGENCY MACHINE OFF (EMO) OPERATION
With the machine powered up, activating the red Emergency Machine Off button
(EMO) immediately powers down the machine both electrically and pneumatically.
PRINTHEAD COVER
Raising the printhead cover suspends operation of the machine to allow the
operator safe access to the tooling area.
Calibrate Squeegees
DEK
Calibrate Squeegees
DEK
Calibrate Squeegees
DEK
The squeegees are about to undergo calibration. Please ensure that the correct
squeegees are fitted for this operation.
Select Continue to proceed with this calibration.
Select Restore Defaults to restore the default parameters.
Calibrate Squeegees
DEK
The squeegees are about to undergo calibration. Please ensure that the correct
squeegees are fitted for this operation.
Select Continue to proceed with this calibration.
Select Restore Defaults to restore the default parameters.
To activate:
Press the EMO button, electrical and pneumatic power to the
machine is removed.
To reset:
Turn the EMO button clockwise to release the latch.
Press the Start button (green) to restore electrical and
pneumatic power.
The safety devices designed into this machine are for the protection of all operator
and maintenance personnel. ASM strongly recommend safety devices are never
overridden.
Safety Devices
3
SAFETY
Tricolour Beacon
Two Button Control
Two Button Control
Monitor
Mains Isolator
Emergency Machine Off Button
Emergency Machine Off Button
(at rear of machine)
Internal Light
System Button
Start Button
60min
60min+
30min+
Current Product: DEK04
-
+
Cycle Time
9.6 sec
0%
25%
50%
75%
100%
Batch Limit
200
2323
Status
Process
Ready
Set up
Product
Maintenance
Paste Dispense Paper Solvent
30
Shut Down
23°C
Temperature
68%
Humidity
Net Files
Language Help
Adjust
90
20
60
Large
View
Board
View
Print
Load
Screen
Change
Operator
QC Calc
Product
Changeover
Open Cover
Commands
Dispenser
Clean 1
Clean 2
Clear
Board
Count
DEK
Interactiv
Host Comms
Board Count Batch Count
Change
Print Direction
Clean 1
0
0
4
MACHINE OVERVIEW