196396 Iss 2 Nov 2015 - Semi Appendix Manual - 第135页
PREVENTIVE MAINTENANCE CLEANING, LUBRICATION AND MAINTENANCE DIAGRAMS 28.74 Technical Reference Manual Chapter Issue 5, Aug 14 Figure 28-16 Grease the TRS Pull Down Reference Forks Apply a small amount of grease to the c…
PREVENTIVE MAINTENANCE
CLEANING, LUBRICATION AND MAINTENANCE DIAGRAMS
Chapter Issue 5, Aug 14 Technical Reference Manual 28.73
Figure 28-15 Topside Referencing System (TRS)
Cylinder Springs (4)
Stripper Spring (2)
Lock Pin (2)
View from Beneath the Assembly
Front of Printer
Z-Lock Return Springs
Z-Lock Cylinders
Anchor Pillar
Post
Cut-away to show
spring beneath
pusher plate
Return Spring
PREVENTIVE MAINTENANCE
CLEANING, LUBRICATION AND MAINTENANCE DIAGRAMS
28.74 Technical Reference Manual Chapter Issue 5, Aug 14
Figure 28-16 Grease the TRS Pull Down Reference Forks
Apply a small amount of grease to the cleaned fork groove and underside area
PREVENTIVE MAINTENANCE
CLEANING, LUBRICATION AND MAINTENANCE DIAGRAMS
Chapter Issue 5, Aug 14 Technical Reference Manual 28.75
VF35i Vacuum
Filtration Unit
To replace any of the filters in the Vacuum Filtration Unit, carry out the following:
1. Ensure the machine is switched OFF.
2. Remove the machine front panel.
3. Remove the air duct from the carbon filter unit using a screwdriver or box
spanner to release the securing clip.
4. Release the filter retaining clip to detach the filters from the base unit.