西门子SIPLACE S25 HM-设备性能参数_EN - 第36页
34 Description Transporting Transporting Transporting Transporting Use a fork lift with a lifti ng force of 6 tons to move the SIPLACE S-25 HM pl acement machine . Forks 2 m long are required for a packed machine, 1 .5 m…
33
Technical Data:
Dimensions and Set-Up Conditions
Values
Length 1587 mm
Width 2641 mm
Height from transport to warning lamp 1120 mm
Weight of basic module 1500 kg
Weight fully equipped 2000 kg
Room temperature
Humidity
Between 15° and 35°C
30-80%, on average not higher
than 45%, so that no condensa-
tion can ever form on the machine
Maximum noise development
74 dB
A
SIPLACE S-25 HM
1036
360
375
Height of PCB transport
830
± 15 mm (standard)
900
± 15 mm (option)
930
± 15 mm (option)
950
± 15 mm (option)
SMEMA
Foot height 120 mm
1120
1587
725
740
1921
2641
All Units in mm
Height of PCB transport
360
34
Description
Transporting
TransportingTransporting
Transporting
Use a fork lift with a lifting force
of 6 tons to move the SIPLACE
S-25 HM placement machine.
Forks 2 m long are required for a
packed machine, 1.5 m for an un-
packed one.
Pick the machine up with the fork
lift at the locations especially de-
signed and identified as being for
this purpose.
When setting up the SIPLACE
S-25 HM, make certain that the
surface it is placed on possesses
the required load bearing capacity.
Commissioning
CommissioningCommissioning
Commissioning
For commissioning, install the fol-
lowing components which were
not premounted upon delivery:
§ Monitor
§ Keyboard
§ Warning lamp
§ Component changeover tables.
Technical Data:
Transporting and Commissioning
Transport dimensions
Length with packing
Width with packing
Height with packing
2150 mm
1850 mm
1600 mm
Center of gravity (X,Y coordinates) 0 mm, 0 mm
Floor load (more details about floor characteristics on request)
Total weight of equipped machine 2 metric tons
Permissible surface load sub-floor
(load per unit area on mounting feet)
(based on assumed distribution of
machine weight to three machine legs
a
)
9 kg/cm
2
a) Worst case scenario; 4 legs per machine installed, area per leg: 104 cm
2
.
35
Left Side Right Side
6-Nozzle Collect & Place Head 12-Nozzle Collect & Place Head
Nozzle Changer
Changeover Table with
20 feeder locations for
Tapes, Sticks and Bulk
Reject Bin
Reject Bin
Matrix Tray
Changer
Changeover Table with
9 feeder locations for
Tapes, Sticks and Bulk
Nozzle Changer
3-Section Conveyor with automatic
width adjustment for PCBs from
50 x 50 mm
2
up to 508 x 460 mm
2
( 2" x 2" up to 20" x 18" )
PCB Transport
Direction
Possible Machine Configuration