西门子SIPLACE S25 HM-设备性能参数_EN - 第37页
35 Left Side Right Si de 6-Nozzle Co llect & P lace Head 12-Nozzle C ollect & P lace He ad Nozzle Changer Changeover T able with 20 feeder locations for Tapes , Sticks and B u lk Reject B in Reject B in Matrix Tr…
34
Description
Transporting
TransportingTransporting
Transporting
Use a fork lift with a lifting force
of 6 tons to move the SIPLACE
S-25 HM placement machine.
Forks 2 m long are required for a
packed machine, 1.5 m for an un-
packed one.
Pick the machine up with the fork
lift at the locations especially de-
signed and identified as being for
this purpose.
When setting up the SIPLACE
S-25 HM, make certain that the
surface it is placed on possesses
the required load bearing capacity.
Commissioning
CommissioningCommissioning
Commissioning
For commissioning, install the fol-
lowing components which were
not premounted upon delivery:
§ Monitor
§ Keyboard
§ Warning lamp
§ Component changeover tables.
Technical Data:
Transporting and Commissioning
Transport dimensions
Length with packing
Width with packing
Height with packing
2150 mm
1850 mm
1600 mm
Center of gravity (X,Y coordinates) 0 mm, 0 mm
Floor load (more details about floor characteristics on request)
Total weight of equipped machine 2 metric tons
Permissible surface load sub-floor
(load per unit area on mounting feet)
(based on assumed distribution of
machine weight to three machine legs
a
)
9 kg/cm
2
a) Worst case scenario; 4 legs per machine installed, area per leg: 104 cm
2
.
35
Left Side Right Side
6-Nozzle Collect & Place Head 12-Nozzle Collect & Place Head
Nozzle Changer
Changeover Table with
20 feeder locations for
Tapes, Sticks and Bulk
Reject Bin
Reject Bin
Matrix Tray
Changer
Changeover Table with
9 feeder locations for
Tapes, Sticks and Bulk
Nozzle Changer
3-Section Conveyor with automatic
width adjustment for PCBs from
50 x 50 mm
2
up to 508 x 460 mm
2
( 2" x 2" up to 20" x 18" )
PCB Transport
Direction
Possible Machine Configuration
36