00197044-02_IM_706_1_DE_EN - 第45页
Station S oftware 706. 1 / Install ation Man ual Ausgabe 11/2012 E dit ion 45 7.1 X-S eries P lac em ent M achines The f ollowing win dow is displa yed for the X - s eries m achines. H ere you can ed it, conf irm or rej …
Station Software 706.1 / Installation Manual Ausgabe 11/2012 Edition
44
As of station software version 705.03 you will have to set, whether the lamp indicators on the
placement machine towers shall be displayed two-colored (green / white) or three-colored (green /
white / red) for all placement machines of the SX-series and DX-series. More information about the
two lamp indicator systems can be found in the version description of the 705.03 station software,
item number 00196770-01.
Figure 7-4: Setting lamp indicators
► Select the desired lamp indicators and click the Accept button.
Station Software 706.1 / Installation Manual Ausgabe 11/2012 Edition
45
7.1 X-Series Placement Machines
The following window is displayed for the X-series machines. Here you can edit, confirm or reject
the Auto-configuration.
Figure 7-5: Confirming Auto-configuration for X-series
► Click the Confirm changes and continue startup button to confirm the Auto-configuration.
► If the Coplan computer has been installed, you will additionally have to confirm or reject the 3-D
Coplan sensor.
7.2 X4Si Placement Machine
► When the X4Si placement machine is booted for the first time you have to select the following
options manually:
– If a TrayStak Feeder is used, this has to be defined for each location concerned in the
Auto-configuration.
– Table position (inner and outer)
Station Software 706.1 / Installation Manual Ausgabe 11/2012 Edition
46
7.3 SX1/SX2 (V2) Placement Machine
For the SX1/SX2 (V2) placement machine the following window is displayed, in which the Manual
selection required note informs, that the table configuration has to be selected manually, as this is
not detected automatically.
Figure 7-6: Selecting table configuration
► Click the ? question mark next to Location 2.
The selectable table configurations are displayed.
Figure 7-7: Possible table configurations
► Select a table configuration with or .