00193431-03 - 第37页

HS-50 Modification Long Board Option 2 Assembly instructions Long Board Option SIPLACE HS-50 03/2007 Edition 37 2.1.2 Wiring for machines with the old transport controller conversion board loca- ted in the front on the r…

100%1 / 46
2 Assembly instructions Long Board Option SIPLACE HS-50 HS-50 Modification Long Board Option
03/2007 Edition
36
: Shrink-fit the sleeve over the cables using a suitable heat source (see diagram).
2
2
: Push the crimp contacts into the plug.
Check that the correct cable numbers are assigned to each plug (the numbers must tally).
: Plug the complete cables into the transport controller conversion board.
2
2
The slots for the cables are the same for the dual conveyor. 2
2
Stopper valve X 12 Conversion board connection X 12 (am/an)
Sensor on the cylinder X 11 Conversion board connection X 11 (am/an)
PCB detection BERO X 16 Conversion board connection X 16 (am/an)
Coding plug X 19 Conversion board connection X 19 (ao/ap)
Cable with
shrink-fit sleeve
HS-50 Modification Long Board Option 2 Assembly instructions Long Board Option SIPLACE HS-50
03/2007 Edition
37
2.1.2 Wiring for machines with the old transport controller conversion board loca-
ted in the front on the righthand side
2
2
2
2
2
2
2
Old version of the conversion board
only used with dual conveyor (left con-
veyor track, not present on single con-
veyor)
Old version of the conversion board
(single conveyor)
Coding plug at X19
Stopper valve plug X12, Sensor plug
X11, BERO plug X16
Pin assignement for single and dual
conveyor
SLIO transport track 2 (dual conveyor)
SLIO transport track 1
(single conveyor)
2 Assembly instructions Long Board Option SIPLACE HS-50 HS-50 Modification Long Board Option
03/2007 Edition
38
: Now plug the finished cables into the transport controller conversion board.
2
2
The slots for the cables are the same for the dual conveyor. 2
2
2
Additional information: 2
2
Fig. 2.12 - 2 HS-60 transport controller: same connections as in Fig. 6 - 2.2
2
Stopper valve X 12 Conversion board connection X 12 (am/an)
Sensor on the cylinder X 11 Conversion board connection X 11 (am/an)
PCB detection BERO X 16 Conversion board connection X 16 (am/an)
Coding plug X 19 Conversion board connection X 19 (ao/ap)