00192375-01 - 第184页
SIPLACE GEM for S25, HS50 SW Version GEM 502.01 HOST Inter face Manual Page 184 of 236 ©Siemens AG, all rights reserved 9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLR Q For a detailed desc ription of the data item s …
SIPLACE GEM for S25, HS50 SW Version GEM 502.01
HOST Interface Manual
©Siemens AG, all rights reserved page 183 of 236
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
)0D[%DOO'HY!
!
IRUHDFKVHJPHQW
!
The first element in this list refers to segment 1, the
second to segment 2 and so on. If a segment was not
in use in the last placement cycle the list for that
segment is left empty.
SIPLACE Revolver Head 4
2412001 SV I4 HEIGHTREV4
Height of revolver head 4. Only valid after reference
run. Units are 1/1000 mm
During the reference run the SIPLACE measures the
distance between the upper edge of the conveyor belt
and the nozzle on segment 1. The
HEIGHTREVOLVER4 is then calculated by subtracting
the length of the nozzle on segment 1 from the
measured value. The nozzle length is defined in the
machine data. So HEIGHTREVOLOR4 is a relative
not an absolute value.
A value of 0 indicates an error
2412002 SV L GANTRYINFOREV4
Gantry information for revolver head 4. The data is
automatically reseted when a PCB reaches the center
conveyor.
/
,&RPS3LFNHG8S!
,&RPS3ODFHG!
,&RPS/HIW3ODFH!
!
CompPickedUp Number of components which
were picked up successfully since
the last PCB reached the center
conveyor
CompPlaced Number of components which
were placed since the last PCB
reached the center conveyor
CompLeft2Place Number of components which
were not placed on the actual
PCB
An empty list indicates an error.
SIPLACE GEM for S25, HS50 SW Version GEM 502.01
HOST Interface Manual
Page 184 of 236 ©Siemens AG, all rights reserved
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
For a detailed description of the data item see „4.2
Data Item Dictionary“.
2412003 SV L PLACEINFOREV4
Placement information for revolver head 4.
/
/
8;SRVLWLRQ!>PP@
8<SRVLWLRQ!>PP@
)$QJOH!>GHJUHHV@
8)RUFH,QGH[!
$5HIHUHQFH'HVLJQDWRU!
$&RPSRQHQW1DPH!
83DFNDJH)RUP1XPEHU!
83ODFHPHQW5HVXOW!
,3ODFHPHQW9DFXXP!>PEDU@
,9DFXXP!>PEDU@
8'DWD9DOLG!
,;GHYLDWLRQ!>PP@
,<GHYLDWLRQ!>PP@
)$QJOH!>GHJUHHV@
84XDOLW\!>@
8/HQJWK!>PP@
8:LGWK!>PP@
/
,3LWFKBSHUBOHDGBJURXS!
,3LWFKBSHUBOHDGBJURXS!
!
)0D[/HDG'HY!
)0D[%DOO'HY!
)2UWKR'HY!>GHJUHHV@
8/HDG&RXQW!
!
!
The first element in this list refers to segment 1, the
second to segment 2 and so on. If a segment was not
in use in the last placement cycle the list for that
segment is left empty
SIPLACE GEM for S25, HS50 SW Version GEM 502.01
HOST Interface Manual
©Siemens AG, all rights reserved page 185 of 236
9,' &ODVV )RUPDW 1DPHDQG'HVFULSWLRQ
For a detailed description of the data item see „4.2
Data Item Dictionary“.
An empty list indicates an error.
2412004 SV L PICKUPINFOREV4
Pick-up information for revolver head 4
/
/
$&RPSRQHQW1DPH!
,7UDFN1XPEHU!
8)HHGHU7\SH!
,/HYHO!
,'LYLVLRQ!
8/RFDWLRQ!
83LFN8S5HVXOW!
,3LFN8S9DFXXP!>PEDU@
L9DFXXP!
!
!
The first element in this list refers to segment 1, the
second to segment 2 and so on. If a segment was not
in use in the last pick up cycle the list for that segment
is left empty.
If the component was picked up from a feeder /HYHO
will contain -1.
In the case that the component was picked up from a
tray in the matrix tray changer 7UDFN1XPEHUwill
contain the 7RZHU of the MTC1,2). In this way
PICKINFOREVx has the same format as in previous
versions.
For a detailed description of the data item see „4.2
Data Item Dictionary“.
An empty list indicates an error.
2412005 SV L NOZZLECONF4
Nozzle configuration on revolver head 3. Only valid
after reference run.
/
/
812==/(B7<3(!
,5($/B12==/(B/(1*7+!>PP@