00194440-10_SM_X-Series_Customer_en - 第43页
Overview of the Modules 2.4.5 Width Adjustment X Series Docking Unit Service Manual SIPLACE X Series 43 2.10 2 . 1 0 X S e r ie s D o c k in g U n it X Series Docking Unit Overview See also 3.7 X-Seri es COT Insert […
Overview of the Modules
Overview of TwinHead 2.4.5 Width Adjustment
42 Service Manual SIPLACE X Series
2.8
2.8 Overview of TwinHead
Overview of TwinHead
2.9
2.9 C&P20 Nozzle Changer
C&P20 Nozzle Changer
See also
3.5 C&P20 Nozzle Changer [ ➙ 142]
1. Module 1
2. Module 2, rotated by 180° compared to module 1.
3. Main board on module 1 and module 2
4. D Axis
5. Linear motor Z axis
6. Z axis incremental measurement system
1. Cover (covering complete electronic and pneumatic
systems)
2. Toggle (six of them)
3. Nozzle magazine
4. Fastening screws
1. Cover (2 x 4 fastening screws)
2. Control board NC
3. Valve assembly
4. Swivel drive
5. Microswitch (six of them)
6. Green LED 3 mm
4
1
4
3
2
5
1
6
5
4
3
2
Overview of the Modules
2.4.5 Width Adjustment X Series Docking Unit
Service Manual SIPLACE X Series 43
2.10
2.10 X Series Docking Unit
X Series Docking Unit
Overview
See also
3.7 X-Series COT Insert [ ➙ 195]
1. Complete component trolley feed device for X Series
[03015680-xx]
2. Voltage supply [03020549-xx]
3. Transport direction
1. Component trolley feed device, complete
2. Safety switch [03019065-xx]
3. Feeder control unit (FCU) [03020068-xx]
4. Feeder unlock device [03011582-xx]
5. Cutter
1
3
2
1
5
4
3
2
Overview of the Modules
HF R2 Docking Unit 2.4.5 Width Adjustment
44 Service Manual SIPLACE X Series
2.11
2.11 HF R2 Docking Unit
HF R2 Docking Unit
Overview
See also
3.8 COT Insert HF R2 [ ➙ 202]
2.12
2.12 Cutter
Cutter
Overview
See also
3.9 Cutter [ ➙ 210]
1. Component trolley feed device, complete
2. ODU connector with cable tree
3. Undocked short-stroke cylinder for the component
trolley
4. Control valves
5. Docked component trolley round cylinder
1
5
4
3
2
1. Tape cutter, pneumatic
2. Pneumatic cylinder
3. Control unit
4. Solenoid valves.
2
4
1
4
3
2