YS100_Mainte_E - 第131页
5-1 5 Lubrication points and schedule 1. Lubrication preparations 1.1 Compatible grease F or greasing procedures, always use the Y AMAHA prescribed grease shown below . c CAUTION Using unauthorized grease could damage th…
5-1
5
Lubrication points and schedule
1. Lubrication preparations
1.1 Compatible grease
For greasing procedures, always use the YAMAHA prescribed grease shown below.
c
CAUTION
Using unauthorized grease could damage the machine.
Lubrication Point Lubrication section Grease Name
Main unit
X-axis
Ball screw
NSL grease
Part No.: K48-M3856-00X
Guide
Y-axis
Ball screw
Guide
W-axis
Ball screw
Guide
Hexagon spline
PU-axis
Ball screw
Ball guide
Head Z-axis Spline shaft
1.2 Grease gun
The grease gun has 3 interchangeable nozzle types to accommodate the various greasing point configurations.
Always use the prescribed nozzle for the greasing point in question.
Grease gun
Grease gun
30° bent type nozzle
Standard nozzle
The various
nozzle tips are
inserted here
Flexible chuck type nozzle
30°
OD ø14 tip
OD ø10 tip
OD ø0.5 tip
53500-L1-00
c
CAUTION
Prepare the tip nozzle for grease to be used. If two or more kinds of grease with different characteristics are mixed in
the nozzle and it is applied, this may cause the machine performance to lower.
5-2
5
Lubrication points and schedule
2. Lubrication points and schedule
2.1 X-axis
X-axis guide
X-axis lubrication points
X-axis ball screw
Grease nipple
Grease nipple (lower side)
Grease nipple (upper side)
53501-L1-00
Lubrication section Lubrication point Interval Procedure
Guide 4
Every 2 months
Grease gun : Bent type nozzle (ø 5mm)
Ball screw 1 Grease gun : Bent type nozzle (ø 5mm)