CM602规格说明书（英文） - 第38页
CM602-L 2006.0515 - 33 - Tray Conditions ・ Tra y dimensions : The outs ide dim ensions of tra y shall satisf y the follo wing co nditi ons. ・ Component h oldin g: Tr ay shall b e capa ble of ho lding c om ponents, satis …
CM602-L 2006.0515
- 32 -
■
Direct Tray Feeder
DT50S-20 (Option)
Installing the direct tray feeder DT50S-20 onto CM602-L enables the placement of tray feeding components.
DT50S-20 can be installed on the rear side (AR and BR) of CM602-L. It cannot be installed on the front side
(AF and BF). The direct tray feeder can be connected only to the stage of multi-functional head type.
When the direct tray feeder DT50S-20 is installed on a table of CM602-L, the feeder table (not attachable/
detachable) that holds a maximum of six feeders is installed next to the direct tray.
Type D-0, D-1 and E-0
Type F-0
Frontside
Rear side
AR
BR
Two DT50S-20s installed on CM602-L
DT50S-20
2727
Feeder table
(Four places)
20 6 20
27
27
27
Feeder table
(Four places)
20
6
CM602-L 2006.0515
- 33 -
Tray Conditions
・
Tray dimensions: The outside dimensions of tray shall satisfy the following conditions.
・
Component holding: Tray shall be capable of holding components, satisfying the following conditions.
Conditions of component Position error
Pick up face: Under 10 mm × 10 mm ±1.0 mm or less
Pick up face: 10 mm × 10 mm or over ±1.5 mm or less
* However, these conditions are valid only when the top of component has a flat pick up face.
Xw + Position erro
r
Yw + Position error
Tray setting reference point
(Tray origin)
Coordinates of component’s cente
r
(X, Y) = (Xw, Yw)
Tray
Pocket
Component
X
Y
Maximum tray dimensions
Minimum tray dimensions
Max. 335 mm
Min. 100 mm
Min. 85 mm
Max. 136 mm
CM602-L 2006.0515
- 34 -
・
Warp: “Warp” of the tray to be loaded on a pallet shall meet the following conditions.
“
Warp” = Clearance Max. 0.5 mm
・
Type: For enough strength and dimensional accuracy, tray shall be injection molded, not vacuum molded.
(If your trays do not meet these conditions, please consult us. Then we check your sample trays and
suggest option or customization.)
・
Conditions for tray loading: The trays (components) to be loaded on a pallet and a magazine shall satisfy
the following conditions.
①
The total mass of components on a tray shall be 1
㎏
or less including the tray.
(Excluding the mass of pallet)
②
The total mass of the magazine with pallets and trays (components) shall be 20
㎏
or less.
Magazine + Pallets + Trays + Components = Max. 20
㎏
/magazine
③
If the height of the tray on a pallet exceeds 11 mm, a pallet cannot be inserted into the next higher slot
in the magazine.
Additionally if the height of the tray on a pallet exceeds 26 mm, a pallet cannot be inserted into the next
higher slot in the magazine.
Tray + Components = Max. 1
㎏
/pallet
Clearance
Tray
Clearance
Tray
Max. 335 mm
Over 11 mm to 26 mm or less
11 mm or less
Insertable
Over 26 mm to 33 mm or less
Not insertable
Not insertable