CM602规格说明书（英文） - 第51页
CM602-L 2006.0515 - 46 - C-1 To s elect the no zzle to t he pr oduction pattern. Customer Nozzl e ・ All nozzles are option s so tha t you can select the best c o mbinatio n of them to make f ull use of CM 602-L to your p…
CM602-L 2006.0515
- 45 -
B-1
To change the positions of PCB support pins externally, in order to reduce the changeover time.
Customer
PCB support block
・
The machine comes with four PCB support blocks to be set and used for placement.
(Because the number of support pins is 20 per block, a total of 80 pins is included as standard.
Additional purchase by the block (20 pins) is available.)
・
If requiring more PCB support blocks for external preparation, please purchase as many ones as you need.
・
To set up the positions of support pins for new PCB externally, please purchase “Support pin setting jig”
[option] separately.
・
Common to CM402-L, CM401-L, and DT401-F.
Not sharable with CM402-M, CM401-M, CM400-M, DT401-M, DT400-M, CM212-M, CM202/201, and CM301.
B-2
To set up the positions of support pins for new PCB externally, in order to reduce the changeover
time.
Customer
Support pin setting jig
・
To prepare the support pins externally, please purchase the “PCB support block” [option] separately.
・
Common to CM402-L, CM401-L, and DT401-F.
Not sharable with CM402-M, CM401-M, CM400-M, DT401-M, DT400-M, CM212-M, CM202/201, and CM301.
B-3
To automate the nozzle changing operation in changeover.
On-site
By stage
Nozzle changer (for High Speed head (12 nozzles))
(This holds 36 nozzles.)
On-site
By stage
Nozzle changer (for High Speed head (8 nozzles))
(This holds 28 small nozzles and 2 large nozzles.)
・
In the High Speed head specifications, the nozzle changing for the optimum nozzle layout is supported in changeover.
・
In the High Speed head specifications, automatic nozzle changing operation is carried out exclusively in changeover.
Reason)
①
If nozzles are changed during the placement of one PCB, the placement tact time will be affected.
②
Since there are 24 and 16 attachable nozzles per stage for High Speed head (12 nozzles) and High Speed
head (8 nozzles) respectively, the nozzles for High Speed head cannot be changed during operation.
・
Using the nozzle changer may shorten the life of nozzles and nozzle holders.
(In the High Speed head specifications, their life is about three years if changed 10 times a day.)
・
The multi-functional head comes standard with the nozzle changer. (Please see D-5.)
CM602-L 2006.0515
- 46 -
C-1
To select the nozzle to the production pattern.
Customer
Nozzle
・
All nozzles are options so that you can select the best combination of them to make full use of CM602-L to your pro-
duction pattern.
・
For information about the nozzle types, please see “4-2 Nozzle Type & Configuration”.
・
For information about the special nozzles, please contact us.
・
The nozzles are compatible with CM402, CM401, CM400, DT401, DT400, and CM212.
・
For information about the compatibility with CM202/201 and CM301, please contact us.
C-2
To store nozzles.
Customer
Nozzle case
・
The one for the High Speed head can accommodate 50 small nozzles and 10 large nozzles (Another box).
・
The one for the Multi-functional head can accommodate 24 nozzles.
・
The nozzle case is compatible with CM402, CM401, CM400, DT401, DT400, and CM212.
C-3
To select the tape feeder to the production pattern.
Customer
Tape feeder
・
Please refer to “4.4 Feeder Carriage Configuration” for tape feeder types.
・
The tape feeder is compatible with CM402, CM401, CM400, DT401, and CM212.
C-4
To use the 32 mm adhesive tape.
Customer
32 mm adhesive tape feeder
Factory
By table
Air supply unit for the feeder
・
Please refer to “4.4 Feeder Carriage Configuration” for tape feeder.
・
The tape feeder is compatible with CM402, CM401, CM400, DT401, and CM212.
・
To use the adhesive tape feeders, the machine needs the required number of air supply unit for the feeder (1 set per
table). (Please see C-7.)
C-5
To use the tape feeder of 21 mm deep.
Customer
Tape feeder (boss of 21 mm deep maximum)
On-site
By table
Cutting unit for 21 mm thickness T/F (adapter)
On-site
By table
Feeder cart for 21 mm thickness T/F (adapter)
・
Please refer to “4.4 Feeder Carriage Configuration” for tape feeder.
・
The tape feeder is compatible with CM402, CM401, CM400, DT401, and CM212.
・
To use the tape feeders with the boss of 21 mm deep, choose both the Cutting unit for 21 mm thickness T/F and the
Feeder cart for 21 mm thickness T/F.
∗
When this option is installed, tape cutting sound may become louder.
CM602-L 2006.0515
- 47 -
C-6
To select the stick feeder according to the production pattern.
Customer
Intelligent stick feeder
Customer
Guide block
・
For information about the types of intelligent stick feeder, see “4.4 Feeder Carriage Configuration”.
・
The intelligent stick feeder is compatible with CM402, CM401, CM400, DT401, and CM212.
∗
Guide block is used when components are difficult to be picked up by the placement machine in the feeding method with
the tip-cut sticks because the transfer state of components and the components posture at the pick-up position are not
good depending on the component/stick shape, etc.
C-7
To select the bulk feeder according to the production pattern.
Customer
Intelligent bulk feeder
Factory
By table
Air supply unit for the feeder
・
For information about the types of intelligent bulk feeder, see “4.4 Feeder Carriage Configuration”.
・
The intelligent bulk feeder is compatible with CM402, CM401, CM400, DT401, and CM212.
・
To use the intelligent bulk feeder, the air supply unit for the feeder needs to be installed on the machine’s side.
∗
Even when the air supply unit for the feeder is installed, the single tape feeders can be set as usual.