CM602规格说明书（英文） - 第63页
CM602-L 2006.0515 - 58 - 9. Paint Colo r ■ Standard color W hite W -13 (G50) ■ Designation of colors This page is us ed when c ustom er needs to design ate c olor. No. Place wher e you can designate the co lor (Place pa …
CM602-L 2006.0515
- 57 -
E-3
To enable the communication between PT and only the desired machine with its power ON.
Factory
HUB power supply box
・
Without this option, the power of every machine needs to be ON for the purpose of establishing communication between the desired
machine on a line with PT, because the hub’s electric source in each machine is synchronized with the machine’s electric source.
・
When this option is selected, the hub’s electric source in each machine will be ON whether each machine’s electric source is ON or
OFF; therefore, just turning ON the power of the desired machine will enable the communication between this machine and PT.
CM602-L 2006.0515
- 58 -
9. Paint Color
■
Standard color
White W-13 (G50)
■
Designation of colors
This page is used when customer needs to designate color.
No.
Place where you can designate the color
(Place painted standard color)
Designated color
(As a rule, color sample is necessary.)
①
Upper cover (Left
・
Right)
②
Upper plate
③
Lower cover (Front
・
Rear)
④
Frame side cover (Left
・
Right)
⑤
Transfer unit cover (Left
・
Right)
* The following cannot change the original color.
・
Open/Close cover frame (black)
・
Feeder cart
・
Main operating area (Front
・
Rear)
・
Y-axis motor cover (4 locations)
・
Touch panel cover (Front
・
Rear)
②
③
③
③
④
⑤
①
①
②
②
CM602-L 2006.0515
- 59 -
10. Safety Devices
CM602-L has the following safety devices for the safety use of machine.
When an emergency stop switch is pressed or the cover is opened while the machine is operating, the operation
is forcibly stopped.
(
∗
) The safety sensor will not be installed to the transfer opening where the optional extension conveyor is installed. When the optional
extension conveyor is installed, a safe distance between the transfer opening and the moving part is secured. The open/close detection
switch is installed to the cover of the optional extension conveyor.
∗∗
Remarks
∗∗
•
Check enough the separate instruction manuals and the warning instructions of equipment to operate the
machine properly, regardless of operating or stopping it, for the safety use of it.
Cover open/close detection switch
(
×
4 on both sides)
Emergency stop switch
(
×
2 on both sides)
Servo switch
(
×
2 on both sides)
Transport opening safety sensor
（
∗
）
(On the upstream and the
downstream side: Two in total)
Emergency stop switch
(One place)
Direct tray feeder (option)
Extension-conveyor (optional)
cover open/close detection switch
(On the upstream and the
downstream side: One each)